Information

Woodbury County REC Crew Inspection

  • Person Conducting Crew Inspection

  • Conducted on

  • Prepared by

  • Location of inspection (individual report per location)

CREW MEMBERS

Person In Charge

TEAM Member names

DESCRIPTION OF WORK BEING PERFORMED

STARTING THE JOB

  • Employee in charge on site

  • Documented Tailgate - hazards, special precautions, energy source controls, PPE required and employee fitness

  • Any alternative energy sources to be aware of (wind, solar, etc.)

  • Tailgate kept in standard location at job site (foreman truck, on cone by truck etc.)

  • Adequate number of crew for the job

  • Proper rated FR clothing available

  • Conductive articles (jewelry) removed when working energized equipment

  • One call notified

  • Horseplay noticed

  • Weather conditions

  • Terrain conditions in work area

  • Member permission sought when working on private property

CONDUCTOR WORK (includes energized, de energized and de energized and grounded work)

  • Qualified Employee doing work

  • Cover-up used

  • Used proper amount of cover-up

  • Gloves and sleeves (if applicable) worn cradle to cradle, lock to lock and ground to ground

  • Proper class of glove worn

  • Protectors in good condition

  • Proper class of sleeve worn

  • Proper rated FR clothing worn

  • Observer watching

  • Breaker set on one shot/hotline tag

  • Proper disconnection of energized equipment

  • Good practices during switching of circuits

  • Proper LOTO practices

  • One person in charge of clearance

  • Tested for absence of voltage prior to grounding

  • Conductor cleaned before applying ground

  • Ground clamps in good condition

  • Grounds installed with live line tool

  • Grounded properly (ground connection first to make last to break?)

  • Running grounds used

  • If multiple crews - proper communication used

  • Add media

AERIAL DEVICES

  • Boom clean

  • Pre-flight of controls

  • Controls marked

  • Wheels chocked

  • Outrigger pads used

  • Proper fall protection worn

  • Trucks grounded

  • Correct amount of fiberglass out when needed

  • Co workers rubber gloves located outside of truck for possible bucket rescue

  • Used approved device and method when lifting equipment (OH transformers, material, OCR's etc.)

  • Load being lifted was within rated capacity of equipment

  • Proper hand signals/communication occurred between operator and crew when maneuvering load

  • Maintained positive control of load

  • IAEC Best Practice suggestions (Suggestions to work more safely while performing specific procedures)

NEUTRALS

  • Add media

  • Bridged before opening

  • Proper communication used

CLIMBING

  • Employee certified as climber

  • Inspected tools before climbing

  • Sharps on hooks guarded

  • Long sleeve shirt worn while climbing

  • Hand line used

  • Co workers climbing gear out of truck and ready if needed for pole top rescue?

  • Best practice suggestions

  • Add media

POLES

  • Hauled properly (Including flag and/or light at end of pole?)

  • Proper Gloves worn while handling (rubber gloves when applicable)

  • Proper cover-up when setting pole near an energized system

  • Used pole puller to remove pole(s) being being replaced

  • Pole tongs used

  • Crew avoided being underneath suspended loads

  • Crew maneuvered load to avoid getting caught between objects

  • Proper hand signals/communication occurred between operator and crew when maneuvering load

  • Maintained positive control of load

  • Add media

EQUIPMENT AND TRAILERS

  • Current registration (trailers, ATV's etc)

  • Current DOT inspection - trailer(s)

  • Select date

  • Current Fire Extinguisher inspection date

  • Select date

  • Safety devices and features in good operating condition

  • Wheel chocks used when applicable

  • Seat belt worn while operating equipment

  • Adequate number of tie downs used

  • Adequate rated tie down used for load securement

  • Add media

MISC EQUIPMENT (Other CMV's or equipment such as backhoes, dozers, forklifts, skidsteers etc.)

  • Type of equipment

  • Add media

  • Current DOT inspection

  • Current registration

  • Current Fire Extinguisher inspection date

  • Select date

  • Safety devices and features in good operating condition

  • Wheel chocks used when applicable

  • Seat belt worn while operating equipment

  • Add media

VEHICLES

  • Daily inspection completed

  • Current insurance and accident information in vehicle

  • Current inspection date of First Aid, Fire Extinguisher and BBP kit

  • Select date

  • Select date

  • Select date

  • AED battery life indicator good

  • Seat belts worn while in transit

  • Interior/exterior well kept

  • Adequate Cargo Securement practices

  • Adequate tire inflation and tread depth

  • Back up alarms working

  • Current dielectric test

  • Select date

  • Current DOT annual inspection

  • Select date

  • Add media

TRAFFIC CONTROL

  • High visiblility vests worn

  • Signs used in accordance to traffic control rules and regs

  • Proper size signs

  • Cones used in accordance with traffic control rules and regs

  • Proper size cones

  • Minimum 5 cones used as promoted by IAEC Safety

  • Flagger used when needed

  • Proper flagging equipment

  • Flagging done properly

  • Four way flashers used

  • Strobe/Rotating light in use

  • IAEC Best Practice suggestions (Suggestions to work more safely while performing specific procedures)

  • Add media

URD WORK

  • Competent person on job site

  • Adequate trench protection

  • Means of egress in trench

  • Spoils 2ft from trench

  • Cables spiked before cutting

  • Compliant signage on cabinets (warning/danger)

  • Cabinets locked with dual locking system (penta bolt and padlock)

  • Used approved device and method when lifting URD equipment (transformers, switchgear, peds etc.)

  • Load being lifted was within rated capacity of equipment

  • Crew avoided being underneath suspended loads

  • Crew maneuvered load to avoid getting caught between objects

  • Proper hand signals/communication occurred between operator and crew when maneuvering load

  • Maintained positive control of load

  • Add media

TREE TRIMMING

  • Proper PPE worn (chaps, hearing, eye/face and head protection etc.)

  • Safe operation of chainsaw took place (Started safely/used chain break etc.)

  • Chainsaw fueled 10' or more from work zone

  • Chainsaw safety features operable

  • PPE used during chemical application

  • Sprayers labeled properly

  • Co workers in safe work zone from chainsaw operator

  • Rubber gloves worn when needed

  • Employee tied in when in tree

  • Cables in good condition

  • Best practice suggestions

  • Add media

SUBSTATIONS

  • Qualified employee for level of work being performed

  • Proper PPE worn

  • Observer watching

  • Substation gate properly secured during work process

  • Substation is compliant with applicable regulations

  • IAEC Best Practice suggestions (Suggestions to work more safely while performing specific procedures)

  • Add media

ROPES, SLINGS, STRAPS, HOISTS, CHAINS

  • Strap hoists compliant

  • Chain hoists compliant

  • Ropes in good condition (including hand lines and rope locks)

  • Slings compliant

  • Chains compliant

  • Add media

TOOLS

  • Battery, electric, hydraulic and hand tools stored properly

  • Cords in good condition

  • Hydraulic hoses/connectors in good condition

  • Sharps guarded when not in use

  • Correct tool used for the job

  • Proper PPE worn with tool being used

  • Tool safety devices in place and working

  • Avoided pinch points while operating tools

  • Add media

HOT STICKS

  • Proper length

  • Clean and free of moisture?

  • Stored properly

  • Add media

LIVE LINE TOOLS, JUMPERS AND GROUND TEST DATES

  • Live line tool test date compliant

  • Select date

  • Jumpers/Macs test date compliant

  • Select date

  • Grounds test date compliant

  • Select date

  • Hot arm test date

  • Select date

PROTECTIVE WEAR - HEAD, EYE, FACE AND HEARING

  • Compliant Z89 Class E hard hat

  • Clean

  • Compliant Z87 eyewear

  • Side shields

  • Head and eye protection worn

  • Approved face shield worn (if required per arc flash study)

  • Decibel reading from smart phone app

  • Hearing protection worn

RUBBER GOODS TEST DATES

  • Rubber gloves test date compliant

  • Select date

  • Rubber sleeves test date compliant

  • Select date

  • Cover up compliant test date (rubber hoses/guts, blankets, hard cover up)

  • Select date

SUMMARY, COMMENTS AND PICTURES

  • Add media

  • Add media

TEAM MEMBER SIGNATURES - confirms crew inspection detail has been discussed with you

  • Add signature

  • Status

  • Add signature

  • Status

  • Add signature

  • Status

  • Add signature

  • Status

  • Add signature

  • Status

  • Add signature

  • Status

  • Add signature

  • Status

  • Add signature

  • Status

  • Add signature

  • Status

  • Add signature

  • Status

Woodbury Supervisor Signature (person conducting crew inspection)

Kent Amundson

  • Add signature

Nate Bauer

  • Add signature

The templates available in our Public Library have been created by our customers and employees to help get you started using SafetyCulture's solutions. The templates are intended to be used as hypothetical examples only and should not be used as a substitute for professional advice. You should seek your own professional advice to determine if the use of a template is permissible in your workplace or jurisdiction. You should independently determine whether the template is suitable for your circumstances.