Interior Wall Inspection - Mortenson Denver

• Document No.

• Audit Title

• Client / Site

• Conducted on

  Date

• Prepared by

• Location
  Address

• Personnel

• Date and time of Inspection

  Date

Interior Studs

• Verify Stud size/gauge as shown on cold form framing structural drawings (CF series)

  Yes

  No

  N/A

• Verify Stud spacing per CF drawings

  Yes

  No

  N/A

• Verify integrity of studs (cut-outs, notches, kinks, bends are not acceptable)

  Yes

  No

  N/A

• Verify stud framing around door head/jamb

  Yes

  No

  N/A

• Verify stud walls are braced/kicked properly

  Yes

  No

  N/A

• Verify corner details per CF drawings

  Yes

  No

  N/A

• Verify installation of horizontal bracing

  Yes

  No

  N/A

• Verify Wall surface is in an even plane with no bowing or twisting studs

  Yes

  No

  N/A

• Verify framing at fire doors

  Yes

  No

  N/A

• Verify location of openings for fire hose cabinets, interior doors, interior windows, fire extinguishers

  Yes

  No

  N/A

• Steel door frame--verify stud connection at all anchor points

  Yes

  No

  N/A

• Firesafing and strapping at STC rated walls

  Yes

  No

  N/A

• Temp. screws pulled out at slip connections

  Yes

  No

  N/A

• No stud suspended from duct, pipe, conduit or their associated supports

  Yes

  No

  N/A

• Foam isolation strip between interior and exterior studs

  Yes

  No

  N/A

Mechanical

• Plumbing/Piping-Correct pipe sizes and locations

  Yes

  No

  N/A

• Plumbing/Piping-Verify pipe integrity--look for gaps, cuts, gouges, holes

  Yes

  No

  N/A

• Plumbing/Piping--copper pipe supported by plastic or lined with EPDM

  Yes

  No

  N/A

• Hangers--verify all connected to structure

  Yes

  No

  N/A

• Hangers-verify spacing

  Yes

  No

  N/A

• Hangers--pipes supported within 12" of 90 deg pipe bend

  Yes

  No

  N/A

• Hangers-verify support spacing at joints

  Yes

  No

  N/A

• Plumbing fixtures--verify rough-in quality and location

  Yes

  No

  N/A

• Plumbing/Piping--verify cleanout locations

  Yes

  No

  N/A

• Plumbing/Piping--verify floor penetrations are sealed

  Yes

  No

  N/A

• Plumbing/Piping--verify fire rated wall penetrations are installed per specifications

  Yes

  No

  N/A

• Plumbing/Piping--confirm all pipe has passed hydrostatic testing

  Yes

  No

  N/A

• Plumbing/Piping-city inspections performed and signed-off

  Yes

  No

  N/A

• HVAC--Correct duct sizes and locations

  Yes

  No

  N/A

• HVAC-Verify location and size of fire/smoke dampers

  Yes

  No

  N/A

• HVAC-Verify integrity of ducts and supports (cuts, bends, damage are unacceptable)

  Yes

  No

  N/A

• Insulation installed completely

  Yes

  No

  N/A

• Insulation--exposed ends covered in mastic

  Yes

  No

  N/A

Electrical

• Examine conduit for damage (crimping, improper bends, etc)

  Yes

  No

  N/A

• All conduit installed and wire pulled

  Yes

  No

  N/A

• Grommets for fire alarm provided

  Yes

  No

  N/A

• Conduit penetrations in floors are fire-caulked

  Yes

  No

  N/A

• Correct locations for Telecom/Data fixtures

  Yes

  No

  N/A

• Correct locations for outlets and switches

  Yes

  No

  N/A

• Correct size of electrical boxes

  Yes

  No

  N/A

• Support of electrical boxes sufficient

  Yes

  No

  N/A

• Verify rough-in for fire alarm

  Yes

  No

  N/A

• Verify locations of fire alarm devices

  Yes

  No

  N/A

• Verify conduit supported per specifications

  Yes

  No

  N/A

• Verify unused openings in junction boxes are plugged

  Yes

  No

  N/A

Steel/Misc. Metals

• Fireproofing at structural steel patched

  Yes

  No

  N/A

• Supports for vanities installed

  Yes

  No

  N/A

• Bottom track is clean

  Yes

  No

  N/A

Backing/Blocking

• Cabinets/Counter tops

  Yes

  No

  N/A

• Fire Extinguishers/Hose Cabinets

  Yes

  No

  N/A

• Toilet Accessories/Partitions

  Yes

  No

  N/A

• Handrail/Chair rail

  Yes

  No

  N/A