ISO Container Inspection Checklist
Corner fittings
Bottom end rails
Bottom side rails
Door sill
Cross members
Forklift tunnels
ISO identification
CSC safety approval
Stencils
Corner posts
Corner fittings
Door header
Door sill
Door fittings
Door lining
Door gaskets
Rods
Rod retainers
Cams
Cam retainers
J-bars
Rain guttering
Placard holder
Plywood lining
Kick rail
Vertical plate
Horizontal rail
Light leak
ISO identification
Corner fittings
Corner posts
Top side rail
Bottom side rail
Forklift pockets
Panel
Placard holder
Plywood lining
Kick plate
Load bearing surfaces
Light leak
ISO identification
Corner fittings
Corner posts
Top end rail
Bottom end rail
Panel
Placard holder
Plywood lining
Kick rail
Vertical plate
Horizontal rail
Light leak
ISO identification
Corner fittings
Corner posts
Top side rail
Bottom side rail
Forklift pockets
Panel
Placard holder
Flooring
Floor fasteners
Threshold plate
Tie-down devices
Light leaks
ISO identification
Corner fittings
Corner posts
Top end rail
Bottom end rail
Roof panel
Roof bows
Light leaks
I have visually verified to the best of my ability the condition of the container as noted above and found that the container is structurally sound, weather tight, has no false compartments, contains no un-manifested material and the locking mechanisms are in good order.
Additional Recommendations