Title Page
-
Client
-
Site
-
SCOPE OF WORK
-
Contract Manager
-
Site Manager
-
Conducted on
-
Prepared by
EHS – SITE EHS INSPECTION
INTRODUCTION
-
Have all items from previous inspections been closed out?
-
Have the supervisor inspections from the previous month been completed?
1. PUBLIC SAFETY & SIGNS
-
Complete Section
-
1. Hoarding erected / maintained?
-
2. Signage adequate for public/general safety?
-
3. Signs to offices, stores, first aid, etc.?
2. COVID -19 CONTROLS & PAPERWORK
-
Complete Section
-
1. Are staff adhering to the documented site COVID 19 controls?
-
2. Has a site COVID 19 risk assessment been populated and briefed to staff?
3. WORKPLACE ACCESS & WALKWAYS
-
Complete Section
-
1. Is there sufficient pedestrian segregation from plant and equipment?
-
2. Were adequate access and walkways provided?
-
3. Adequate lighting provided?
4. HOUSEKEEPING – TIDINESS & STORAGE
-
Complete Section
-
1. Site areas tidy?
-
2. Safe access to materials? Are materials stacked /stored safely
5. PERSONAL PROTECTIVE EQUIPMENT
-
Complete Section
-
1. PPE correct for task at hand e.g. hard hat, hi viz vest, gloves, boots, eye protection, hearing protection and task specific as identified in the RAMs / Risk assessment
6. ELECTRICAL SAFETY
-
Complete Section
-
1. 110 volt system in use?
-
2. Extension leads in good condition?
-
3. Generators in good condition and placed properly?
-
4. Cables laid / suspended in a safe manner to remove any trip hazard?
-
5. PAT testing in date?
7. FIRE SAFETY
-
Complete Section
-
1. Staff assembly point provided?
-
2. Adequate number of fire extinguishers available? (Fire points adequate for site and levels, seperate extinguishers for HOT WORKS only?)
8. TEMPORARY WORKS
-
Complete Section
-
1. Is there an appointed Temporary Works Co-ordinator?
-
2. Is there an appointed Temporary Works Supervisor?
-
3. Temporary Works Register?
9. POWER TOOLS (PUWER)
-
Complete Section
-
1. Correct power tool for the job?
-
2. Power tools in good condition?
-
3. Have operatives using abrasive wheels (petrol saws, grinders) received Abrasive Wheels training?
-
4. Are staff aware of the HAVs related to the equipment they are using? Is HAVs being recorded?
10. WORK AT HEIGHT
-
Complete Section
-
1. Crash decks in place?
-
2. Voids, Holes and Openings adequately managed? Floor edges/openings/risers/manholes protected?
-
3. Exclusion Zone established and signage in place?
-
4. Are fans required?
-
5. Fall arrest, emergency rescue equipment & procedure in place?
-
6. Is edge protection suitable and sufficient / has edge protection training been provided? Are the correct fixing being used (Fisher) for installation.
-
7. Have Harnesses been inspected? Are they in good condition and in date? Are tools tethered? <br>
-
8. Canti-Deck installed by a trained, competent person?
11. MEWPS
-
Complete Section
-
1. Trained operator?
-
3. Current certificates available for MEWP?
-
3. Pre-use inspection completed?
12. MOBILE SCAFFOLD TOWERS / LOW LEVEL ACCESS
-
Complete section
-
1. Towers erected/supervised by trained personnel?
-
2. Mobile scaffold tower suitable and sufficient for the task being undertaken?
13. PODIUMS / LADDERS / STEPLADDERS
-
Complete section
-
1. Correct podiums / ladders / stepladders in use?
-
2. Podiums / ladders / stepladders in good condition? (missing feet, bent rungs, not cut shorter)
-
3. Equipment used safely? (secured/footed)
14. LIFTING APPLIANCES (LOLER)
-
Complete Section
-
1. Chains / slings/ lifting aids in good working order?
-
2. Lift Plans in place?
-
3. Certified operators/slingers/signaller (CPCS / NPORS)?
-
4. Annual &/or 6 monthly inspection reports available?
-
5. Loads secured?
-
6. Is the lift being controlled?
15.PLANT OPERATIONS - EXCAVATOR / DUMPERS / ROLLERS
-
Complete section?
-
1. Operated by trained personnel (CPCS / NPORS)?
-
2. Reversing aids - e.g. CCTV, mirrors? Is a banksman required? Is there an Exclusion Zone in operation?
-
3. Plant maintained in good condition and daily pre-use inspection completed?
16. EXCAVATIONS
-
Complete section?
-
1. Method Statements/surveys available?
-
2. Permit to Dig in place?
-
3. Inspections carried out daily?
-
4. U/G services located and marked i.e. CA tool on site?
-
5. Access/egress provided?
-
6. Adjacent structures protected?
-
7. Sides guarded – barriers, stop blocks?
-
8. Shoring provided/sides battered or stepped/trench box?
-
9. Edge protection erected along excavation edges?
-
10. Is signage erected highlighting deep excavation?
-
11. Excavated materials stored safely away from excavation?
17. STEEL FIXING
-
Complete Section
-
1. Is steel fixing taking place is accordance with the RAMs?
-
2. Is the correct level PPE being worn?
-
3. Is there safe access?
-
4. Is exposed metalwork / rebar protected?
18. FALSEWORK/FORMWORK
-
Complete Section
-
1. Is formwork being erected in accordance with the RAMs? Is the correct fixing being used for shutter installation?
-
2. Are design drawings available?
-
3. Is the falsework (decking) being erected in accordance with the RAMs?
-
4. Are harnesses being worn, in good condition, tagged and in date?
-
5. Is there a fall arrest system in use? Are staff trained to work on the leading edge?
-
6. Are the leading edges installed as per the manufactures guidance?
19. STRIKING
-
Complete Section
-
1. Is the striking taking place in accordance with the RAMs?
-
2. Is there an exclusion zone in place and signage?
-
3. Are staff working safely near or on the building edge (tool tethers materials stored away from the edge)
20. CONCRETE
-
Complete Section
-
1. Is concrete being pumped / poured as per the RAMs?
-
2. Are all members of staff involved with the concrete wearing the correct level of PPE?
-
3. Have the COSHH assessments for concrete/cement been briefed to the concrete team?
-
4. Is the pump line secured (if required) and are "R" clips fitted?
-
5. Is the concrete lorry set up so as to cause no additional hazard to the site or general public?
-
6. Is there means for disposal of any washout?
21. MANUAL HANDLING
-
Complete Section
-
1. Is the hierarchy of control being used i.e. Task, Individual, Load, Environment?
-
2. Mechanical means in use?
-
3. Has manual handling training taken place?
22. ENVIRONMENTAL
-
Complete Section
-
1. Is waste segregated into correct skips?
-
2. Is dust being managed (suppression/extraction)? Is RPE available? Have staff been trained for the RPE?
-
3. Are suitable COSHH storage facilities available?
-
4. Are COSHH assessments available for all chemicals on site?
-
5. Are spill kits available and adequate?
23. OCCUPATIONAL HEALTH
-
Complete Section
-
1. First Aid and eyewash kits available?
-
2. Trained first-aiders on site sufficient for the number of operatives?
-
3. Sufficient space for the number of personnel on site?
-
4. Kept clean – floors, sinks, tables, appliances etc.?
-
5. Suitable drinking water supply?
-
6. Method for drying clothes provided?
-
7. Hot & cold running water? Means of heating food?
24. DOCUMENTATION / INDUCTION / TRAINING
-
Complete Section
-
1. Method statements & risk assessments available?
-
2. Are sub-contractors working to their documented RAMs? Have the RAMs been reviewed and signed off
-
3. Regular site safety meetings/daily activity briefings?
-
4. Induction information on site?
-
5. Is the correct and latest documentation being used by the site team?
-
6. Emergency procedures displayed?
-
7. Regular toolbox talks taking place?
-
8. Training records?
-
9. Are all mandatory weekly inspections being completed and logged I.E. PUWER, LOLER, ladder inspections etc.
COMPLETION
-
Auditor's name and signature:
-
Site manager's name and signature:
CLOSE OUT
-
Select date
