Spotless Kitchen check list template

• Work order Number/ Project No:

• Address

• Conducted on

  Date

• Prepared by

Kitchen Cupboards

• Max door width 450mm (excluding corner unit doors)

  Yes

  No

  N/A

• Corner unit doors max width 300mm

  Yes

  No

  N/A

• Corner unit door to have either a piono or 2 x doubke hinge

  Yes

  No

  N/A

• All cupboard door must operate on self-closing fully concealed hinges ( excluding piono)

  Yes

  No

  N/A

• All exposed edges to have 2mm ABS edging

  Yes

  No

  N/A

• Door Handles 100mm satin chrome "D" handle

  Yes

  No

  N/A

• All cupboard shelves must be fixed and non-adjustable

  Yes

  No

  N/A

• Internal corner cupboards must be one unit with no partition

  Yes

  No

  N/A

• All exposed and cut edges to be sealed with silicone sealants coat

  Yes

  No

  N/A

• All Kickboards to be 16mm water resistant plywood at 110mm height and to be back from front face of cupboard

  Yes

  No

  N/A

• Wall fittings to all cupboards to be anchored to the wall (top & bottom) 50mm from ends at 600mm centres horizontal

  Yes

  No

  N/A

Drawers

• All Draws to be made from 16mm MDF with 2mm ABS edging and drawer sides to be pre-fineshed MDF

  Yes

  No

  N/A

• Drawers to run on metal runners

  Yes

  No

  N/A

• Ensures that a Plastic cutlery try has been installed and fits neatly in drawer

  Yes

  No

  N/A

Island Cupboards

• Island cupboard must have a 16mm MDF back and must be 750mm wide unless otherwise stated

  Yes

  No

  N/A

• Island Benchtop top to be 850mm (250mm overhang)

  Yes

  No

  N/A

Child proof storage\poison cabinet

• Every kitchen and vanity unit must have a child-proof cupboard. Please note no handle is to be installed on this door

  Yes

  No

  N/A

• Diameter of the hole to be 34mm. 50mm spacing from centre to latch (refer L12 drawing in specs)

  Yes

  No

  N/A

Overhead cupboards

• O/H Cupboard height to be 450mm above benchtop

  Yes

  No

  N/A

• O/H Cupboard height to be 600mm with equal spacing shelves

  Yes

  No

  N/A

• O/H Cupboard depth to be 306mm =(16mm cupboard door and 290 deep cupboard)

  Yes

  No

  N/A

Benchtops

• All benchtops must be 32mm thick MDF

  Yes

  No

  N/A

• All exposed corners must be bevelled to a 20mm radius

  Yes

  No

  N/A

Microwave Self

• Microwave Shelves must be 600mm wide x 450mm x 450mm high and be a minimum 400mm above the bench top

  Yes

  No

  N/A

• Size to be 1944mm (h) x 600 (d) x 1000mm (w) or the same size as replaced

  Yes

  No

  N/A

• Pantry door must have 3 self-closing, fully concealed hinges

  Yes

  No

  N/A

• Timber moulding to wall junction

  Yes

  No

  N/A

• Door handles to be wall junction

  Yes

  No

  N/A

• Door handles to be 900mm centre from F.F.L

  Yes

  No

  N/A

• Shelves to be 330mm spacing

  Yes

  No

  N/A

• Pantry cupboard to have 3 adjustable sleves

  Yes

  No

  N/A

• Timber moulding surrounding -"scribed to suit the existing wall on site and any gaps 1-2mm were fikked with no more gaps or similar. Timber moulding may be required if wall is extremely out of plumb

  Yes

  No

  N/A

Elevated Stove Benchtops

• Bechtop to be 670mm deep (height is to suit elevated cooktop)

  Yes

  No

  N/A

• Tile down to lower benchtop behind the stove/cooktop

  Yes

  No

  N/A

• Upper benchtop to be 900mm above floor level

  Yes

  No

  N/A

• Ensure there is a door stop rail and mullion in cupboard

  Yes

  No

  N/A

• If adjoining cupboard to under bench oven/hotplate are less than 350mm wide, no central shekf is to be installed. If greater than 350mm central shelf must be i stalled

  Yes

  No

  N/A

Sink

• Ensure stainless Stell Sink is Clark either 930mm x 480mm or 1200mm x 480mm (1 1/3 incet sink bowl) PLEASE NOTE THIS IS DIFFERENT TO TECH SPEC DUE TO CHANGE BY MANUFACTURER

  Yes

  No

  N/A

• Ensure a stainless steel sink to be 150mm from cut joins

  Yes

  No

  N/A

• Stainkess stell sink to be 75mm from the edge of the benchtop

  Yes

  No

  N/A

• Stainledd Steel Sink to be silicone to benchtop

  Yes

  No

  N/A

• Cover Plates to be installed

  Yes

  No

  N/A