LAA End Of Shift -Temperature Checks - Sensors Included

Title Page

Thermal Camera (FLIR E6)

The FLIR E6 is the only camera to be used for this inspection. Refer to the operating sheet supplied. The camera is designed to identify potential "hot spots" for further investigation. The camera is Pre-Set and simply needs to be turned on and the lens shutter opened.

Individually check each sling load, hung bags, cart at the end of the production day with a thermal imaging camera. Any sling/laundry cart that has an area of concern (over 50 oC) is to be investigated further. Remember the camera does not see inside bundles or loads of product. You need to open the product up to get a temperature reading in some cases.
If there is product that is smoldering, smoking or has a burning smell it must be removed from the building if it can be done safely and with a minimum 2 persons.
In checking the area is there any product that requires further investigation
Check to see that the internal temperature does not exceed 65 Deg C
- Internal Temperature above 65 Degrees Celscius
- Internal Temperature below 65 Degrees Celsius
Ensure you get assistance prior to removing the product to a safe area
If the item of concern cannot be safely removed from the building and is smoldering or has a burning smell, and you can not wet down with a fire hose call 000 (fire department) immediately and stand by with a hose and/or fire extinguisher(s).

Individually check each sling load, hung bags, cart at the end of the production day with a thermal imaging camera. Any sling/laundry cart that has an area of concern (over 50 oC) is to be investigated further. Remember the camera does not see inside bundles or loads of product. You need to open the product up to get a temperature reading in some cases.
If there is product that is smoldering, smoking or has a burning smell it must be removed from the building if it can be done safely and with a minimum 2 persons.
In checking the area is there any product that requires further investigation
Check to see that the internal temperature does not exceed 65 Deg C
- Internal Temperature above 65 Degrees Celscius
- Internal Temperature below 65 Degrees Celsius
Ensure you get assistance prior to removing the product to a safe area
If the item of concern cannot be safely removed from the building and is smoldering or has a burning smell, and you can not wet down with a fire hose call 000 (fire department) immediately and stand by with a hose and/or fire extinguisher(s).
Are all the dryers empty of product and turned off
If you can safely unload the dryers please do so.
Find someone that can unload the dryers.
What dryer was left loaded

Individually check each sling load and cart at the end of the production day with a thermal imaging camera. Any sling/laundry cart that has an area of concern (over 50 oC), is smoldering, smoking or has a burning smell must be removed from the building if it can be done safely and with a minimum 2 persons. Remember the camera does not see inside bundles or loads of product. You need to open the product up to get a temperature reading in some cases.
If there is product that is smoldering, smoking or has a burning smell it must be removed from the building if it can be done safely and with a minimum 2 persons.
In checking the area is there any product that requires further investigation
Check to see that the internal temperature does not exceed 65 Deg C
- Internal Temperature above 65 Degrees Celscius
- Internal Temperature below 65 Degrees Celsius
Ensure you get assistance prior to removing the product to a safe area
If the item of concern cannot be safely removed from the building and is smoldering or has a burning smell, and you can not wet down with a fire hose call 000 (fire department) immediately and stand by with a hose and/or fire extinguisher(s).

Individually check each SLING LOAD, CART, REWASH TUB at the end of the production day with a thermal imaging camera. Any sling/laundry cart that has an area of concern (over 50 oC), is smoldering, smoking or has a burning smell must be removed from the building if it can be done safely and with a minimum 2 persons. Remember the camera does not see inside bundles or loads of product. You need to open the product up to get a temperature reading in some cases.
If there is product that is smoldering, smoking or has a burning smell it must be removed from the building if it can be done safely and with a minimum 2 persons.
Ensure the temperature probes are placed into the bundles of Tea-Towels
Temperature probes are placed into the product.
In checking the area is there any product that requires further investigation
Check to see that the internal temperature does not exceed 65 Deg C
- Internal Temperature above 65 Degrees Celscius
- Internal Temperature below 65 Degrees Celsius
Ensure you get assistance prior to removing the product to a safe area
If the item of concern cannot be safely removed from the building and is smoldering or has a burning smell, and you can not wet down with a fire hose call 000 (fire department) immediately and stand by with a hose and/or fire extinguisher(s).

Individually check each TROLLEY, STAGING AREA, at the end of the production day with a thermal imaging camera. Any sling/laundry cart that has an area of concern (over 50 oC), is smoldering, smoking or has a burning smell must be removed from the building if it can be done safely and with a minimum 2 persons. Remember the camera does not see inside bundles or loads of product. You need to open the product up to get a temperature reading in some cases.
If there is product that is smoldering, smoking or has a burning smell it must be removed from the building if it can be done safely and with a minimum 2 persons.
In checking the area is there any product that requires further investigation
Check to see that the internal temperature does not exceed 65 Deg C
- Internal Temperature above 65 Degrees Celscius
- Internal Temperature below 65 Degrees Celsius
Ensure you get assistance prior to removing the product to a safe area
If the item of concern cannot be safely removed from the building and is smoldering or has a burning smell, and you can not wet down with a fire hose call 000 (fire department) immediately and stand by with a hose and/or fire extinguisher(s).
Wireless sensors are used to monitor "at risk" products like Tea-towels, Mirco-fiber, Massage Towels, Roller Towels etc. record the placement of each sensor below.
Record the sensor number
What product is the sensor being placed in
Take a photo of the sensor and product