Information

  • Laboratory Safety Inspection Report

  • Group Area and Floor Level

  • Conducted on

  • Prepared By

  • Personnel

1.0 Previous Inspection

  • 1.1 Has the last inspection been reviewed.

  • 1.2 Are there any outstanding actions from the last safety inspection.

2.0. Fire Safety Precautions

  • 2.1 Fire exits, routes and call-points are clearly marked, free from obstruction and known to staff

3.0 First Aid

4.0 Emergency Arrangements

5.0 Security, Working Environment and Welfare Facilities

E. Chemical Storage & Labeling

  • 1. Chemical storage cabinets are properly labeled?

  • 2. Shelving is adequate for supported loads?

  • 3. Large/heavy containers are stored on lower shelves?

  • 4. Chemicals are segregated to avoid incompatibilities?

  • 5. Corrosives are not stored above eye level?

  • 6. Storage quantities are minimized?

  • 7. Storage of chemicals is strictly limited in actively used fume hoods?

  • 8. Materials with shelf lives are dated and disposed of per supplier's recommendations?

  • 9. Secondary containers are used during transport of more than one pint of chemicals?

  • 10. Refrigeration units for chemical storage are labeled No Food?

  • 11. Containers are kept closed except during transfers?

  • 12. Containers are clearly labeled with entire chemical name(s)?

  • 13. Containers are compatible with the chemical?

  • 14. Lab check-out procedures for departing lab workers are in place to avoid long-term storage of abandoned chemicals?

F. Flammables

  • 1. Flammables are stored in flammable liquid storage cabinet for more than 10 gallons per room?

  • 2. Refrigeration units containing flammables are approved for flammables storage?

  • 3. Flammables are separated from oxidizers?

  • 4. Flammable liquids are not stored near ignition sources?

G. Compressed Gases

  • 1. Storage quantities are minimized?

  • 2. Cylinders are secured from tipping by a chain or strap?

  • 3. Cylinder carts are used for transport?

  • 4. Protective valve caps are in place?

  • 5. Empty or unused gas cylinders are promptly returned to supplier?

H. Waste Disposal

  • 1. Containers are kept closed except during transfer of materials?

  • 2. Containers are labeled with the UT Hazardous Waste label?

  • 3. Constituents of the waste on the container label are described with complete chemical name?

  • 4. Hazardous waste storage area is labeled with yellow Hazardous Waste Storage Area sign?

  • 5. Separate disposal containers are available for broken glass?

  • 6. Containers are compatible with waste?

I. Fume Hood

  • 1. Each chemical fume hood has been surveyed?

  • 2. Fume hood vents (baffles) are unobstructed?

  • 3. Fume hoods are used with sash in appropriate position?

J. Awareness: Do laboratory workers know

  • 1. what to do in the event of an emergency, such as fire, injury, including evacuation routes

  • 2. how to clean up chemical spills

  • 3. the location /contents of the Chemical Hygiene Plan

  • 4. the Chemical Hygiene Officer for the lab

  • 5. what an MSDS is and where to find them and other safety information

  • 6. what type of personal protective equipment to use and when to use it

  • 7. what to do with chemical waste

  • 8. what are the most hazardous materials you use and what precautions to take

  • 9. if any of the materials used in the lab are carcinogens, highly toxic agents or reproductive toxins. If so, have you completed a prior approval form?

  • 10. where and how to use emergency equipment, such as safety showers and eyewash stations

  • 11. to question unfamiliar visitors in the lab

  • 12. if anyone in the laboratory is conducting unauthorized research activities

K. General Laboratory Conditions

  • 1. Is the laboratory space organized and free from clutter or potentially unsafe working conditions?

  • 2. Is the space free of any visible mold growth?

  • 3. Current storage conditions do not present a fire hazard and do not block sprinkler systems?

  • 4. Is the area free from any other recognized hazards?

L. Corrective Actions

  • Action Item #1:

  • Action Item #2:

  • Action Item #3:

  • Action Item #4:

  • Action Item #5:

M. Web Links

  • *Note: the link will open below - watch for hand symbol while hovering over link with mouse cursor

  • UTIA Safety Office

    https://safety.ag.utk.edu/

    https://safety.ag.utk.edu/

  • Laboratory Safety Training

    https://extol.tennessee.edu/people/login/index.php

    https://extol.tennessee.edu/people/login/index.php

N. Safety Office Representative Performing Inspection

  • Safety Office

O. Responsible Laboratory Representative (PI or designee)

  • I have reviewed the above findings and agree to the recommended corrective actions. I will ensure the corrective actions are completed in a timely manner.

  • Laboratory Representative

The templates available in our Public Library have been created by our customers and employees to help get you started using SafetyCulture's solutions. The templates are intended to be used as hypothetical examples only and should not be used as a substitute for professional advice. You should seek your own professional advice to determine if the use of a template is permissible in your workplace or jurisdiction. You should independently determine whether the template is suitable for your circumstances.