Ladder Inspection

• Site conducted

  Select

• Conducted on

  Date

• Prepared by

• Working Area
  1. Cordon off the area you are working in.
  2. Never use this equipment if you are feeling ill or under the influence of drink or drugs.
  3. Never use this equipment near buss bars or overhead power lines.
  4. Never exceed the units safe working load.
  5. Always inspect the ladder before use.
  6. Check that the floor is level.
  7. Check that the surface is not wet or slippery.
  8. Inspect the wall or surface to ensure it is sturdy enough to hold the ladder.
  9. Check for protrusions which might obstruct the ladder or make the operator lean out.
  Ladder Set Up
  1. The base of the ladder should be a distance equivalent to 1 rung out from the bottom of the object it is being leant against for every 4 rungs of vertical height.
  2. When the ladder is in place, 3 rungs should extend over the top girder.
  3. Operators should never stretch out from the ladder.
  4. Operators should always have one hand on a rung at least.
  5. Operators must wear shoes that are fit for purpose.
  6. Never carry any loads up a ladder which are unstable.
  7. When the ladder is being footed the operator must have their hands on the stiles not the rungs.
  8. If in any doubt over safety, STOP and contact your supervisor.
  

• Have you read and Understood the Method Statement above?

  Yes

  No

• Is the Identity mark/ladder tag in place/legible?

  Yes

  No

• What is the Ladder ID Number

General

• Are there loose steps or rungs (considered loose if they can be moved at all with the hand)?

  Yes

  No

• Loose or protruding nails, screws, bolts, rivets or other metal parts?

  Yes

  No

• Are there any cracked, split or broken uprights, braces, steps or rungs?

  Yes

  No

• Cracks or impact damage?

  Yes

  No

• Slivers on uprights, rungs or steps?

  Yes

  No

• Damaged worn or missing non-slip feet/bases?

  Yes

  No

• Clean and free of oil, mud, paint, corrosion etc.?

  Yes

  No

Stepladders:

• 

• Wobbly or unstable (from side strain)?

  Yes

  No

  N/A

• Loose or bent hinge spreaders?

  Yes

  No

  N/A

• Stop on hinge spreaders broken?

  Yes

  No

  N/A

Telescopic Ladders:

• 

• Loose/broken or stiff latches?

  Yes

  No

  N/A

• Rust or corrosion on frame?

  Yes

  No

  N/A

Work Platforms:

• 

• Loose hinges?

  Yes

  No

  N/A

• Wobbly or unstable?

  Yes

  No

  N/A

• Stop or hinge spreader broken?

  Yes

  No

  N/A

• Platform bent or cracked?

  Yes

  No

  N/A

Overall Condition:

• Note: If you have answered Yes to ANY of the above, the ladder must be removed from use, marked with a label to ensure further use is prohibited and returned to the service yard. All repair work to ladders and steps may only be carried out by a competent person.

• Is the equipment free from any defects and safe to use?

  Yes

  No

• Inspection carried out by?

  Sign

• Select date

  Date