LIC ACS Audit

• Site conducted

  Good

  Fair

  Poor

  N/A

• Conducted on

  Date

• Gregory Wasserman

• Loc. Breda libera 13, 25028 Verolanuova BS, Italy
  Address

Trains

• Check the blankets are without ink and complete

  Good

  Fair

  Poor

  N/A

• Bearings are not damaged

  Yes

  No

  N/A

• check all 60 Encoders cable that are not Banded or damaged, the spring is ok LED is green and no bearings are damaged

  Pass

  Fail

  N/A

• Check all the Hall Effect sensors for no damage specially on cables

  Pass

  Fail

  N/A

• Check all the Axiopea boxes are not damaged

  Good

  Fair

  Poor

  N/A

• Perform Currant test from Tzabar tool

  Pass

  Fail

  N/A

Bus bar

• Check that the Bus Bar is Clean

  Yes

  No

  N/A

• No damaged plastics the bar located inside the plastic

  Yes

  No

  N/A

• Less than 3 mm gap in the 4 bus bar connections

• Check Bus bar for no Scratches

  Yes

  No

  N/A

• Electrical connection is correct

  Yes

  No

  N/A

Communication cables

• No damaged cables found

  Yes

  No

  N/A

• All the cables are well attached and connected

  Yes

  No

  N/A

• Tie raps are not too tight

  Good

  Fair

  Poor

  N/A

• Calibrated correctly sensor gap (4mm)

• Cable routing, Molex connector

  Yes

  No

  N/A

Axiopea All Boxes

• Check all the cables are connected and not free, Molex are not damaged, D type connector is locked

  Pass

  Fail

  N/A

• Driver - No movement found and locked

  Pass

  Fail

  N/A

• Coil brushes - All brushes are complete and touching the bus bar `

  Pass

  Fail

  N/A

• Check the screws that holds the Axiopea board, all the screws are locked

  Yes

  No

  N/A

Oil system

• Check for no oil leakage

  Pass

  Fail

  N/A

• Check that all the tubes are connecting properly

  Yes

  No

  N/A

• check that the tank is without damage

  Good

  Fair

  Poor

  N/A

ACS controller

• Check that all Pi board connection are secured

  Pass

  Fail

  N/A

• Check all the Molex and cables are not damaged

  Good

  Fair

  Poor

  N/A

• Check that the fan is working

  Yes

  No

  N/A

• Check the Flex cables secured and not damaged

  Good

  Fair

  Poor

  N/A

Total