M-series Site survey V1.1

• IP number

• Client/ Site

• Area description eg. Line 1, Leg 3 etc

• Sales person

  Select Matt Crowder Mike Topolinski Ian Canavan Jamie Corden Nick Alterskye Jarrid Rowe Chris Neild Scott Standring Dave Edwards

  • Matt Crowder
  • Mike Topolinski
  • Ian Canavan
  • Jamie Corden
  • Nick Alterskye
  • Jarrid Rowe
  • Chris Neild
  • Scott Standring
  • Dave Edwards

• Conducted on

  Date

• Prepared by

• Location
  Address

Production line information

• Photos of proposed installation area

  Media

• Customer requirement

• Conveyor Dimensions (Width, Length & Height)

• Is the conveyor fixed speed?

  Yes

  No

• Conveyor Linear speed (m/min)

• Min conveyor speed (m/min)

• Max conveyor speed (m/min)

• Will the label be applied to more than 1 product size

  Yes

  No

• Product size (WxLxH)

• Min product size in mm (WxLxH)

• Max product size in mm(WxLxH)

• Product pitch (mm)

• Label size (W x L)

• Label orientation

  Wide edge leading

  Narrow edge leading

  Other

• Add addition information

• Label position

  Select Top Side Front Rear

  • Top
  • Side
  • Front
  • Rear

• Specific position of label on chosen side

• Are the product handled on the line to allow reliable label application

  Yes

  No

• Ensure the customer understands it is their responsibility to have the product presented to the labeller in a way that allows reliable and repeatable coding performance!

• Does the labeller require any integration into the line?

  Yes

  No

• Printer ready signal

• Printer low media signal

• Printer error signal

• Print/ Apply signal from host

• Other

• Integration detail

• Any additional information

Printer Information

• Printer Type

  T4

  T6

  Other

• Printer orientation

  0 degree

  270 degree

  Horizontal

• Printer Handing

  Left

  Right

• Stroke

  200

  400

  160

  360

  Other

• Stroke length required

• How many print/ apply sensors are required?

  0, supplied by host

  1

  2

• Please add additional detail in integration section

• Sensor type

  Retro-reflective

  Proximity

  Custom

• Custom sensor type

• Printer stand

  Electric

  Fixed

• Printer orientation

  0 degree

  270 degree

  Horizontal

• MT27002 fixed floor stand with feet, 0 degree

• MT27001 fixed floor stand with wheels, 0 degree

• MT27003 fixed floor stand with feet, 270 degree

• MT26008 fixed floor stand with wheels, 270 degree

• Printer orientation

  0 degree

  270 degree

  Horizontal

• MT25551 electric floor stand with feet, 0 degree - 230vac

• MT21585 electric floor stand with feet, 0 degree - 115vac

• MT27004 electric floor stand with wheels, 0 degree - 230vac

• MT27006 electric floor stand with wheels, 0 degree - 115vac

• MT26022 electric floor stand with feet, 270 degree - 230vac

• MT27008 electric floor stand with feet, 270 degree - 115vac

• MT27005 electric floor stand with wheels, 270 degree - 230vac

• MT27007 electric floor stand with wheels, 270 degree - 115vac

• Additional information

Services to be supplied by Customer

• 1 x 110-240vac, 6A supply at agreed position of printer

• 1 x 115/230vac, 6A supply for electric stand (if required)

• 1 x ~6 Bar air supply, 10mm OD tube for connection to M -Series air kit at agreed position of printer

• 1 x Ethernet port at agreed position of printer (if required)

• 1 x Fixed IP address prior to installation (if required)

• It is the responsibility of the customer, unless agreed with Domino that the products are presented to the Domino labeller in way that allows reliable and repeatable coding performance.
  
  The Domino coders are supplied as standard with UK, 3 pin plugs attached. It is the responsibility of the customer to supply, unless agreed with Domino, any fittings required to connect the coding equipment to the customers electrical supply.