Shop test program approved by GL
Generator shop test by manufacturer
Ambient air temperature and pressure
Maximum compression pressures were taken?
Maximum combustion pressures were taken?
Bearings Temperatures were taken?
Crankshaft deflection was measured?
Starting test was performed?
L.O. low pressure alarm is working properly?
C.W. high temperature alarm is working properly?
Lube oil engine alarm is working?
Water level low alarm is working?
Low voltage alarm is working?
Three automatic start failure is working?
Overspeed stop is working properly?
Automatic start function is working?
Automatic stop function is working?
Emergency stop function is working?
Test at 0% MCR load
Test at 25% MCR load
Test at 50% MCR load
Test at 75% MCR load
Test at 100% MCR load
Test at 110% MCR load
Governor response is acceptable?
Torsional vibration is acceptable?
Voltage regulation is acceptable?
Comments on overhauling of generator set
Final comments on inspection