Magnetic Particle Examination Report

• Job No.

• Certificate No.

• Customer

  Select Delta Mining Pty Ltd - Berrima Colliery Clarence Colliery Austar Coal Mine Pty Ltd Endeavour Coal Pty Ltd - Westcliff Colliery Centennial Angus Pty Ltd Lake Coal Pty Ltd - Chain Valley Colliery Centennial Newstan Pty Ltd Metropolitan Collieries Pty Ltd - Helensburgh Colliery Centennial Myuna Tahmoor Coal Pty Ltd Lake Coal Pty Ltd - Mannering Colliery

  • Delta Mining Pty Ltd - Berrima Colliery
  • Clarence Colliery
  • Austar Coal Mine Pty Ltd
  • Endeavour Coal Pty Ltd - Westcliff Colliery
  • Centennial Angus Pty Ltd
  • Lake Coal Pty Ltd - Chain Valley Colliery
  • Centennial Newstan Pty Ltd
  • Metropolitan Collieries Pty Ltd - Helensburgh Colliery
  • Centennial Myuna
  • Tahmoor Coal Pty Ltd
  • Lake Coal Pty Ltd - Mannering Colliery

• Customer Order No.

• Vehicle

• Conducted on

  Date

• Place of Test

Testing Details

• Material Specification or Type

  Type A

  4140

  Other

  N/A

• Australian Standard AS1171:1998

• Test Procedure Used

  Select Non-Destructive Test - AC Method Non-Destructive Test - DC Method

  • Non-Destructive Test - AC Method
  • Non-Destructive Test - DC Method

• Technique

  AC Hand Yoke

  DC Hand Yoke

• Method

  Black/White Contrast

  Fluorescent

• Background Lacquer Batch No.

• Black Ink Batch No.

• Fluro Batch No.

• Test a Equipment No.

  Select MP1 MP4 MP5 MP6 MP7 MP8 DC1 ( Battery Fighter)

  • MP1
  • MP4
  • MP5
  • MP6
  • MP7
  • MP8
  • DC1 ( Battery Fighter)

• Surface Condition

• Please indicate if any coating is present and the thickness and uniformity of the coating.

• Surface Preparation Method

  Select Needle Gun Wire Brush Grit Blast

  • Needle Gun
  • Wire Brush
  • Grit Blast

• Lighting Level (lux)

• Is the lighting level acceptable?

  Yes

  No

• (Min 1000Lux - Black/White Contrast)
  (Max 20Lux - Fluorescent Method)

• Artificial Light?

  Yes

  No

• Black Light Level (W/m2)

• Is the black light level acceptable?

  Yes

  No

• (Min 10W/m2 - Fluorescent Method at 380mm)

• Demagnetisation

  Yes

  No

Item Details

Item

• Description

  Select Male Coupling Pivot Pin Female Coupling Oval Pin Coupling Bolt Safety Chain Bridle Bridle Bolt Bridle Chain Yoke Male Drawbar Male/Female Drawbar Coupling Box Pivot Hole Safety Hook

  • Male Coupling
  • Pivot Pin
  • Female Coupling
  • Oval Pin
  • Coupling Bolt
  • Safety Chain
  • Bridle
  • Bridle Bolt
  • Bridle Chain
  • Yoke
  • Male Drawbar
  • Male/Female Drawbar
  • Coupling Box
  • Pivot Hole
  • Safety Hook

• Area Tested

  Select 100% of Welds All Accessible Welds All Structural Welds 100% of Item Other

  • 100% of Welds
  • All Accessible Welds
  • All Structural Welds
  • 100% of Item
  • Other

• Details of Area Tested

• Identification No.

• Date of Test

  Date

• Result

  Select No Recordable Discontinuities Complies Does Not Comply Visual Only First Repair Required Second Repair Required Longitudinal Crack Lack of Root Fusion

  • No Recordable Discontinuities
  • Complies
  • Does Not Comply
  • Visual Only
  • First Repair Required
  • Second Repair Required
  • Longitudinal Crack
  • Lack of Root Fusion

• Discontinuity Abbreviation

  Select Excess Penetration Bead Lack of Inter Run Fusion Shrinkage Groove

  • Excess Penetration Bead
  • Lack of Inter Run Fusion
  • Shrinkage Groove

• Photo showing positions of discontinuities detected.

  Media

• Can the item be repaired on site?

  Yes

  No

• Date of Retest

  Date

• Retest Result

  Select No Recordable Discontinuities Complies Does Not Comply Visual Only First Repair Required Second Repair Required Longitudinal Crack Lack of Root Fusion

  • No Recordable Discontinuities
  • Complies
  • Does Not Comply
  • Visual Only
  • First Repair Required
  • Second Repair Required
  • Longitudinal Crack
  • Lack of Root Fusion

• Photo showing tested repairs

  Media

• Has the item been tagged out of service?

  Yes

  No

• Photo showing out of service tag

  Media

• Site contact informed that item has been tagged out and needs to be returned to our workshop for repairs

• If the item requires further repair it must be tagged out of service. Ensure the item is tagged out of service and the site contact is informed before leaving site.

  

• Has the item been tagged out of service?

  Yes

  No

• Photo showing out of service tag

  Media

• Site contact informed that item has been tagged out and needs to be returned to our workshop for repairs

• If the item requires repair then it must be tagged out of service. Ensure the item is tagged out of service and the site contact is informed before leaving site.

  

• Photo of ID/Unit No.

  Media

• Photo of Item

  Media

Comments

• Comments

Testing Officer Sign off

• Testing Officer

  Sign

• Level

• AINDT No.