Information

  • Masonry QC Inspection

  • Conducted on

  • Prepared by

  • Stainless steel reinforcement with pintels at exterior walls.

  • Hot dipped (galvanized) joint reinforcement at interior walls.

  • T- and corner reinforcement where there are intersections.

  • Two courses of Durawall above and below all openings.

  • Verify rebar locations and sizes.

  • Windows are plumb and level.

  • Verify embed plate locations and elevations.

  • Open face shells at T-intersections.

  • Grout stops and safety bolts.

  • Verify correct mortar and grout.

  • Verify mortar consistency.

  • Verify grout consistency.

  • Consolidation of grout when placing.

  • Mortar joints are consistent and aligned.

  • Verify alignment of soldier course joints.

  • Verify elevations of walls and openings.

  • MEP openings and penetrations are in place.

  • Doors are plumb, level and square.

  • Maintain 3/8" around door jambs.

  • Windows are plumb and level.

The templates available in our Public Library have been created by our customers and employees to help get you started using SafetyCulture's solutions. The templates are intended to be used as hypothetical examples only and should not be used as a substitute for professional advice. You should seek your own professional advice to determine if the use of a template is permissible in your workplace or jurisdiction. You should independently determine whether the template is suitable for your circumstances.