MicroDrive QA Check List.1.2*16

Does the gate type match the order?

Will there be a spare parts inspection going along with is order?

Will there be a boom inspection going along with this order?

Was the gate paperwork signed off?

Are all of the serial numbers written down?

Is the gate left handed?

Check cable to spring clearance.

Are the spring jam nuts tightened?

Was the gate tested?

Does the gate have a "tested by" sticker signed?

Were any extra devices installed?

Are all of the yellow marks correct?

Does the gate have the correct number of springs?

Does the order call for LED lights?

Do the LED lights function properly?

Do they flash red while the gate is in motion?

Are they solid red while the gate is closed?

Are they solid green while the gate is open?

Does the motor type match the gate type?

Access = 144A-E101

Access-L = 144A-E103

Access Pro = 144A-E100

Access Pro L = 145A-E100

Access Pro H = 145A-E100

Access XL = MHK-166B-E100

Access XXL = MHK-166-E101

Parking = 144A-E101

Parking Pro = 144A-E100

Parking Pro M = 144A-E100

Toll = 144A-E100

Toll Pro = 144A-E100

Toll Highspeed = 144A-F100

Is the hood gasket installed?

Does the gate have the correct UL sticker?

Does the gate serial number sticker match the gate type?

Does the controller have all of the plugs?

Does the color match the order?

Does the hood match the housing?

Is the door dark grey?

Is the door a special color?

Is the gate set up for articulated?

Does it have the housing bracket?

Are all of the bolts installed for the housing bracket?

Does it have the correct springs?

Does the gate have any accessories?

Is the flange correct?

Are the small parts included with the flange?

Standard Flange

Breakaway Flange

Swing Away Flange ( OEM only)

Round Boom Flange (TOLL only)

Is the Vario grey section included? (Short housing only)

Are the small parts included with the Vario section?

Are the u-rails included?

Is anything else ordered with the gate that should be installed?

Is anything else ordered with the gate that needs to be palletized?

Does the gate have special wiring?

Are 2 keys included?

Is the manual included?

Are 2 warning stickers included?

Do both doors slide into the channels without binding?

Does the hood fit properly and able to be locked without binding?

If this is an International order make sure there is no "made in Germany" labels on the product or on the packaging. Answer yes if there are NO made in Germany labels.

Is the overall fit and finish up to Magnetic Quality?