Title Page
-
Electrical cord and Power tool inspection
-
Conducted on
-
Prepared by
-
Location
A. General Requirements for Hand Tools
-
1. Are hand tools in good condition with no damage?
-
2. Tools are used according to the proper function and purpose?
-
3. Tools are examined for damage before use?
-
4. Damaged or unsafe tools are taken out of service?
B. Electric Powered Tools
-
1. Tools have a three-wire cord with a ground or double insulated?
-
2. Cords are in good condition without frays or deterioration?
-
3. Power tools inspected prior to use?
-
4. Damaged or unsafe tools are taken out of service?
-
5. Correct tool used for the job?
D. Electrical Cords
-
1. Cords have no visible damage, sheathing is not cut, no exposed wire or frayed
-
2. Plug end prongs are not missing, bent or broken
-
3. Plug ends are not separated from cord sheathing or insulation
-
4. Cords do not have breaks, kinks or twists that may expose wires
-
5. Damaged or unsafe cords are taken out of service
-
Inspectors Signature