Title Page
-
Job #
-
Conducted on
-
Prepared by
-
Address
Meeting items
-
The following items to be checked, recorded and signed off by the Slab Supervisor.
-
Site Datum
-
Finished Floor Level F.F.L
-
Slab set back
-
Building work must not encroach over an allotment boundary
-
Confirm location of boundary walls
-
Confirm location of side and rear set backs.
-
Departures from documented external dimensions of buildings are defects if they exceed L/200 where L is the documented overall length of wall, or 5mm, whichever is the greater.
-
Confirm external building dimension
-
Confirm slab / rooms are square.
-
Confirm isolated pad and strip footing locations.
-
Confirm slab and edge beam thickness.
-
Slab is non-compliant if it differs in level by more than 10mm in any room or area, or more than 4mm in any 2m length. The overall deviation of floor level to the entire building footprint shall not exceed 20mm.
-
Confirm slab level.
-
Max depth to wet area set down = -50mm (Check Engineers Site Classification Report)
-
Confirm extent of wet area set down.
-
Finish to a concrete slab is defective if it is not suitable for the documented applied finishes such as tiles, decorative concrete, carpet or sheet flooring
-
Confirm concrete finish is acceptable.
-
Cracks to slabs are defective where they are greater than 2mm to 4mm.
-
Confirm any concrete cracking is within tolerance.
-
Other comments and discussions
-
Name and signature of Supervisor
-
Copy sent to Construction Manager
