Information
-
JOB AUDIT TITLE INCLUDING JOB NUMBER
-
CLIENT /SITE
-
ENGINEER
-
Conducted on
-
Location
-
Prepared by
PLEASE CHECK THAT ALL ITEMS ARE SATISFACTORY AFTER ADJUSTING AS NEEDED
PIT AREA
-
Check if there Is excess oil/ grease at bottom of guides?
-
Check the pit area is clean and dry and free from debris
BUFFERS
-
Check oil level is ok
-
Check Lubrication is ok
-
Check Switch is ok where fitted
-
Check fixings are ok
TANK UNIT
-
Check Hydraulic Fuel Level is ok
-
Check if there is a leakage in the Tank and Valve Unit
JACK
-
Check if there is an Oil Leakage
TELESCOPIC JACK
-
Check for Synchronisation
CONTROLLER
-
Check for Cabinet is clean, dry and free from dust.
OVERSPEED GOVERNOR & TENSION PULLEY
-
Check moving parts for free movement.
-
Check if there is wear in moving parts
-
Check Operation is ok
-
Check Switch is ok
MAIN ROPE PULLEY(S)
-
Check condition is good
-
Check if there is wear in the grooves
-
Check Guarding is ok
-
Check Lubrication is ok
CAR / BALANCING WEIGHT / JACK GUIDES
-
Check If there is a film of oil where required on all guide surfaces
-
Check Fixings are ok
CAR / BALANCING WEIGHT / JACK GUIDE SHOES
-
Check if there is wear in the Guide Shoes / Rollers
-
Check Fixings are ok
-
Check Lubrication is ok
ELECTRIC WIRING
-
Check Insulation is ok
LIFT CAR
-
Check Emergency Lighting, Car Buttons, Key Switches are ok
-
Check Fixings of panels and ceilings are ok
SAFETY GEAR / PAWL / CLAMPING DEVICES
-
Check moving parts for free movement.
-
Check if there is wear in moving parts
-
Check Lubrication is ok
-
Check Fixings are ok
-
Check Operation is ok
-
Check Switch is ok
SUSPENSION ROPES AND CHAINS
-
Check if there is wear, elongation or tension
-
Check Lubrication is ok and is only were intended
-
Check Doors are free running
ROPES / CHAINS TERMINATIONS
-
Check if there is deterioration or wear
-
Check Fixings are ok
LANDING ENTRANCES
-
Check Operation of Landing Locks is ok
-
Check Doors are free running
-
Check Door guiding is ok
-
Check if there are gaps in the doors
-
Check Integrity of wire rope or chain when used is ok
-
Check Emergency unlocking device is ok
-
Check Lubrication is ok
CAR DOORS
-
Check Door closed contact or lock is ok
-
Check Doors are free running
-
Check Door guiding is ok
-
Check if there are gaps in the doors
-
Check Integrity of wire rope or chain when used is ok
-
Check Passenger door protective device is ok
-
Check Lubrication is ok
FLOOR LEVEL
-
Check Stopping accuracy at landing is ok
FINAL LIMIT SWITCH
-
Check Operation is ok
MOTOR RUN TIME LIMITER
-
Check Operation is ok
ELECTRICAL SAFETY DEVICES
-
Check Operation is ok
-
Check Electrical Safety Chain is ok
-
Check Correct fuses are fitted
EMERGENCY ALARM DEVICE
-
Check Operation is ok
LANDING CONTROLS AND INDICATORS
-
Check Operation is ok
WELL LIGHTING
-
Check Operation is ok
ANTI CREEP DEVICE
-
Check Operation is ok
RUPTURE DEVICE / ONE WAY RESTRICTOR
-
Check Operation is ok
PRESSURE RELIEF VALVE
-
Check Operation is ok
MANUAL LOWERING VALVE
-
Check Operation is ok
HAND PUMP
-
Check Operation is ok
HOSE / PIPE WORK
-
Check if there is any damage or leakage