Information
-
Audit Title
-
Client / Site
-
Conducted on
-
Prepared by
-
Location
-
Personnel
-
Work site safety inspection checklist in accordance with:
Work Health and Safety Act 2011
Work Health and Safety Regulation 2017
1.0 - Previous inspection
-
1.1 - Has the last inspection been reviewed?
-
1.2 - Are there no outstanding actions?
2.0 - WHS Administration / Records
-
2.1 - Safety packs available to all staff
-
2.2 - WHS Plan documented and available on site
-
2.3 - Incident and insurance forms available
-
2.4 - Toolbox and hazard identification to be completed prior to work on site
-
2.5 - SWMS available on site and completed by all staff prior to a specific task being carried out
-
2.6 - Relevant site specific inductions complete for all site staff
3.0 - Safety signs and warnings
-
3.1 - Safety hazard and warnings signs available (eg chemical application in progress, machinery in operation)
4.0 - Amenities
-
4.1 - Evacuation plan displayed and understood by all employees?
-
4.2 - Extinguishers in place, clearly marked for type of fire?
-
4.3 - Extinguishers recently serviced? (Check 6 monthly punch mark on tabs.)
-
4.4 - Regular cleaning arranged
5.0 - First Aid
-
5.1 - First aid kits available, clearly labelled, accessible and fully stocked
-
5.2 - First aid procedure, first aider names and emergency contact available
6.0 - Electrical Safety
-
6.1 - All equipment tested and tagged?
7.0 - Work at heights
-
7.1 - Harness available, tested and suitable for required access
-
7.2 - any operators trained and qualified in harness use
8.0 - Personal Protective Equipment
-
8.1 - Respiratory
-
8.2 - Hearing
-
8.3 - Eye
-
8.4 - Footwear
-
8.5 - Clothing
-
8.6 - Skin / UV
-
8.7 - Gloves
-
8.8 - Sharps kit
9.0 - Plant, Machinery and Handtools
-
9.1 - All plant is properly secured / covered for transporting
-
9.2 - weekly machinery checklists filled out and collected
-
9.3 - Operators hold relevant certification, including drivers license, white card and / or trained and competent to use
-
9.4 - Flashing lights on all machines are clearly visible and operational
-
9.5 - Ensure ROPS are in place and secure. Seatbelts operational and in good working order
-
9.6 - Adequate guarding, reverse beepers and safe operating procedures in place. NOTE: all guards must be in place prior to operation of pant and equipment
-
9.7 - Plant and vehicle logbooks in place and utilised for all plant and vehicles
-
9.8 - All vehicle security including equipment and trailers are adequate
-
9.9 - Any plant due for service? Are they clean and tidy and in good working order?
-
9.10 - Company vehicle - are they clean and tidy, in good safe working order. Check tyres, ask driver about operation. Inspect for damage
10.0 - Hazardous substances
-
10.1 - Hazardous Substance Register complete and available?
-
10.2 - Safety Data Sheets available for all chemicals?
-
10.3 - All containers labelled correctly?
-
10.4 - If applicable are special storage conditions followed?
-
10.5 - Workers trained in the use of hazardous substances?
-
10.6 - If required is PPE available?
-
10.7 - Are eye washes and showers easily accessed?
-
10.8 - Spill kit accessible and fully stocked
11.0 - Environmental
-
11.1 - Environment Management Plan current for site
12.0 - Quality
-
12.1 - Site inspections complete and correct
Sign Off
-
On site representative
-
Auditor's signature