Title Page
-
Job Site
-
Conducted on
-
Prepared by
-
Location
-
Team involved
-
Name and Contact info for Client
JOB SCOPE and SAFETY
-
Is every employee on site fit for duty and understands the work scope?
-
Procedures have been reviewed and understood by all involved parties?
-
How would you rate the condition of the coating application equipment?
-
Specific safety measures are being followed for handling coatings?
-
Have the proper concrete tests been done, and the concrete meets our standards for coating?
-
Is there any extra required prep work before coating? Explain.
-
Are there any additions to the work scope? Explain.
-
Is the substrate prepared to the proper profile?
-
What is the square footage of substrate being coated?
-
Concrete Roofing System; EPX 7 mils, CU-970 60 mils, WP-357 7 mils
-
Underlayment; EPX 10 mils, CU-970 20 mils, XS-350 60 mils (Silica)
-
Concrete Water Tanks; EPX 10 mils, CU-970 20 mils, XS-350 60 mils
-
Roof Garden; EPX 10 mils, CU-970 20 mils, XS-350 60 mils
-
Traffic System 10 year; EPX 10 mils, CU-970 20 mils, XS-350 60 mils (silica), WP-357 7 mils, Aspart-X 7 mils
-
Traffic System 5 year; EPX 10 mils, CU-970 60 mils (Silica), WP-357 7 mils, Aspart-x 7 mils
-
Warehouse Floor; EPX- 10 mils, ASPART-X 4 mils
-
Coating Metal; XPM-3 mils, XS-350 40 mils
-
Coating Metal, XPM 3 mils, XS-350 60 mils
-
Coating Metal, XPM 3 mils, XS-350 120 mils
-
How much chemical is needed to coat this sq footage with the right system at the correct thickness? Give Gallons and Kits for each.
-
Have you reviewed and understand the TDS for each of the chemicals being used in your system?
-
Are the coatings being applied according to the manufacturer's instructions?
-
Is each person qualified for the task given to them?
-
Is the correct PPE on hand to complete the job safely?
-
Are all tools and materials on hand to complete the job? If no, what's missing?
-
Are there any tripping hazards or overhead hazards? Have they been identified and removed if possible?
-
If working from heights, Identify the hazards and safety mechanisms put in place to mitigate risks.
-
List any other safety concerns.
-
Plans for mitigating those concerns.
-
If this job spans more than one day, explain the plan to protect the area and the application.
-
End of day, is the jobs site clean and all tools and chemical collected?