Title Page
-
Customer
-
Machine Number
-
Make
-
Model #
-
Vin #
-
Conducted on
-
Prepared by
-
Location
-
hour meter
-
next service due
-
service codes reset
-
Check for open work orders and defects and action on service
Engine
-
Drain and replace engine oil
-
replace oil filter and check for damage and spigot.
-
drain fuel water seperator and fuel contamination level
-
replace fuel filter
-
check air filters and change as requred
-
check vac valve
-
check coolant level
-
Blow out cooling fins with compressed air
-
check fan belts
-
Check all guarding is in place
-
check for oil leaks
-
check for lose bolts and mounts
-
check cooling pack condition
-
fuel line condition
-
air intake hoses
-
cooling hose condition
-
exhaust condition
Undercarriage
-
replace final drive oils
-
Check Condition of tracks
-
Check track tension adjust if required
-
Check Idler and drive sprockets for condition
-
Check track rollers for condition
-
Grease all grease points
-
Check for cracking and structural defects
-
Check all bolts / nuts and pins are in place and secure
-
check sprocket teeth wear
-
check upper and lower rollers
Hydraulics
-
Change out hydraulic oil and recheck level
-
Check for hydraulic leaks
-
Check condition and operation of hydraulic pumps
-
Check condition and security of all hydraulic hosing and fittings
-
Check operation of all hydraulic funtions
-
Check for segregation and Protection against possible rub through points
-
Grease any hydraulic nipples
-
Check condition of all hydraulic cylinders and valves
Mast / Winch / Hammer
Mast
-
check mast condition for cracking and structural defects
-
check mast slides/guides for condition
-
Check all bolts/nuts/pins and retainers are in good condition / in place and secure
-
Grease all mast points upper and lower
-
Check mast mounts
Winch
-
Check winch condition and operation
-
Check chain or rope condition
-
Check chain or rope tension
-
Check all bolts/nuts/pins and retainers are in good condition / in place and secure
-
Check winch mounts
-
Grease chains and rope points
Hammer
-
Check hammer condition and operation
-
Check all bolts/nuts/pins and retainers are in good condition / in place and secure
-
Check hammer mounts
-
Grease any hammer points
-
orteco - remove hammer and check tie bolt tension and condition
-
Auto Electrical
-
Check condition and tightness of alternator belt and alternator
-
Check alternator is charging
-
Check starter motor security and operation
-
all gauge function
-
Check all electrical control functions
-
Check condition and operation of e/stops and shutdown system
-
check for alarms and codes active and historic
-
Internal and External lights
-
Beacon and blinker operation
-
check battery is secure and in good condition
-
Check battery terminals are clean and in good condition
-
Check condition , protection and segregation of all wiring
-
Check auto elect switches, plugs and solenoids are in good condition and secure
-
Check operation of tramming alarm
