Página de Título
-
Place Where it was conducted
-
Inspected in
-
Inspected by
-
PV
-
Model
-
Serial Number
-
TAG
Features to inspect
-
Check equipment noise level
-
Check equipment vibration level
-
Check equipment dimensional
-
DW Test - Tightness Test
-
Pneumatic test: Pressurized with nitrogen at test and operating pressure, using pressure gauges on the equipment for reading and measuring. (R-410A). Pressure test: 400 PSI
-
Check final pressurization: Specified pressure range> 90 to 100 Psi
-
What is the pressurization?
-
Check refrigerant fluid (R-410A)
-
Refrigeration Test (Equipment Start-up)
Check the following features accordind to data sheet:
-
Replating
-
Heating / humidification system
-
Damper: quantity / functionality
-
Weatherproof kit
-
Coil: No. Rows / No. Circuits / Hydraulic Side / Connections / Frame
-
Hydraulic Seal Plates
-
Does it have LG/ DAIKIN?
-
Expansion Valve - serial number
-
Nº de série do Kit comunicação
-
Expansion Valve / Filter Drier Model
-
Verificar isolamento do tubo de sucção/ Bulbo da válvula de expansão
-
Kit automação/ Kit controle de vazão
-
Position of Machine / Motor / Heat Exchanger
-
Fan: type / flow rate
-
Fan: Serial Number
-
Motor: Type / Voltage / Nº of Poles / Power
-
Motor: Serial Number
-
Filter Frame: Model
-
Filters: Quantity / Model
-
Filters H14: Quantity / Serial Number
-
Collar - base, sill - straps - feet - module splices - welts
-
Visibility Kit
- Approved
- Disapproved
- Not Applicable
-
Pressure Outlet Points
-
Check Paint
-
Check Packing
-
Verify ID
-
Inspector
-
Pictures of finished machine
