Title Page
-
Location
-
Conducted on
-
Prepared by
-
Barrier as installed
-
1. Height 1200mm min approach side AFGL. Including 500mm clear below 900mm NCZ-1, NCZ-2 Cl.2.2.2 & 2.3.1
-
2. Member Spacings 100mm max vertical & horizontal openings (test-Strength & Rigidity of openings Cl.3.1) Cl.2.3.6
-
3.Ground Clearance 100mm max Gap ≤ 100mm under barrier Cl.2.3.7
-
4.Stabilised Ground Surface no loose ground, sand, pebbles, chip-bark etc. directly under barrier Cl.2.3.7
-
5.Stepped/Staggered Fencing Panels NCZ 900mm arc Cl.2.3.5 b&c
-
6.Material Durability Fit for purpose – will not deteriorate, degrade prematurely Cl.2.1
-
7.Glass Barriers certificate of compliance from manufacture or complies AS1288 - “A” Safety Grade – 10mm Cl.2.3.3
-
8.Intersecting Barriers-NCZ’s 300mm inside/900mm outside. where intersect. angle > 900 extend 900mm Cl. 2.2.5
-
9.Surface finish no sharp edges or projections to cause injury or harm - e.g. exposed fixings Cl.2.1
-
10.Outside NCZ-1&2&3 - 900mm no climbable objects on or within 900mm arc eg. Trees/plants, pots, furniture Cl.2.2.2
-
11.Inside NCZ-4 - 300mm no climbable objects on or within inside 300mm Horz. & 900mm Vert. Cl.2.2.2d
-
12.Hand & Foot-Holds no project/indent >10mm wide on surface NCZ-1 or within 900 NCZ-2&3&4 600 slope Cl.2.3.4
-
13.Perforated Material/Mesh apert≤13mm-1200mmHigh / apert >13≤100-1800mmH - measure Horiz widest part Cl.2.3.2
-
14.Perforated Mat’l/Mesh test not reduce height 25kg@top/not lifted by100N force & reduce bottom gap &Flex test 2.3.2e
-
15.Strength Posts & Footings withstand Horz. Steady force 330N @1200mmH for 30 seconds (incl.glass fence)Cl.3.2
-
16.Strength-Flexible comp withst.9.1kg Dynamic ᴓ50mm ½ sphere &1400mm Pendulum @ 400 Fabric,Brushwood,Wiremesh 3.3.2
-
17.Strength-Rigid components withstand 50&330N static force 30sec Steel,Aluminium,Wood,Glass,Acrylic,Masonry 3.3.1
-
18.Strength & Rigidity of openings vert & horiz-ᴓ105mm/20mm cone not pass through with upto150N steady force 3.1
Gates & Latches Clause 2.4
-
19.Direction of Gate Swing must open outwards / swing away from the pool area Cl.2.4.1.1
-
20.Self-Closing & Latching any position & resting on latch after 30sec 25kg mass/100mm from edge-latch side Cl.3.4
-
21.Latch Release Outside Height 1500mm min. AFGL Cl.2.4.2.2 & 2.4.2.3
-
22.Latch Release Inside Reach Over Height 1200mm min AFGL latch 150mm down from top of gate Cl.2.4.2.2
-
23.Hinges & Springs Not Climbable 900mm apart if greater than 10mm wide hand/foothold < 600 slope Cl.2.4.3
-
24.Shielding/Tampering latch not able to be tampered, 150mm from top, < 10mm gap, 450 radius Cl.2.4.2.3
-
25.Gap Under Gate ≤ 100mm to a solid/permanent ground finish – no loos materials Cl.2.4.1.1
-
26.Latch Device not able to be adjusted without use of tool, nor locked/latched in open position Cl.2.4.2.1
-
27.Gate not capable propped opened no potential latching device to keep gate in open position Cl.2.4.1
-
28.Hanging of Gate not lifted/pulled down causing release of latch or gate unhinge or increase bottom gap>100 250N Force
-
29.Glass gate with pivot hinges 50mm gap min b/w 900mm from 1100 down from top (finger entrapment) Cl.2.3.3
Internal Doors open outwards - away from pool External doors not permitted except for indoor pools Cl.2.7
-
30.Latch Release Height 1500mm min AFFL. Top of NCZ-1 shall be ≤ 1200mm AFFL Cl.2.7d&e
-
31.Self-Closing & Latching from any position without manual force & resting on latch Cl.2.7a&b
-
32.Door not capable propped opened no potential latching device fitted to keep door in open position Cl.2.7c
-
33.Projections/Indentations on door ≤10mm none within 900NCZ anywhere b/w floor & 1200mm AFFL Cl.2.7e
Windows Applies to all openings into pool area < 1800mm AFGL from pool area. Note: Standard nylon flyscreens not accepted Cl.2.6
-
34.Restrict opening ≤ 100mm max no keyed locks / sliders not lifted out Test - Strength & Rigidity of openings Cl.2.6b
-
35.Mesh/bar screens securely fixed window<1800 AFGL- Metal wire type & must be permanently fixed by tool 2.6a
Boundary Fencing 1800mm AFGL on pool side & 900mm NCZ-5 on inside face + 500 clear for height 2.2.4 + 2.3.
-
36.Height 1800mm min measured from pool side, Inside face 900mm NCZ5 - outside face can be climbable Cl.2.2.4
-
37.900mm NCZ-5 down from top of fence from pool side–500mm clear zone below NCZ to maintain effective height
-
38.Pool Barrier Intersect Boundary Fence b/t 45&1350 &pool barrier top≤50mm wide OK. Otherwise extend 900m 2.2.4
-
39.Strength & Rigidity In-good service condition - no loose, split, cupped palings-sustain 330N Static force. Rigid test
Retaining walls<1800mmH NCZ1&2 apply&intersections,900mm wing/cantilever section,150 max slope. Cl.2.5
-
41.Retaining Walls > 1800mm NCZ1&2 not required below pool – not slope towards/above-not slope away pool >15 degrees
-
42.Balconies Balcony floor > 1800mmAGF & not project within NCZ-3 of pool barrier. Otherwise pool barrier Req. Cl.2.8
-
43.Above Ground Pool/Spa filtration pump system, ladder, bracing protected i.e. non-climbable wall 1200H
-
47.Swimmin Swimming Pool sited in accordance with the approved plans?
Comments
-
Additional Media
-
Additional Comments
-
Highest Risk Observed
Completion
-
Inspection Completion Time
-
Sign
