Information
-
Practical Assessment - Front End Loader
-
Candidate
-
Date
-
Location
-
Assessor
-
Level IV Assessor
Pre-start
-
Carries out required pre-shift inspection
-
Understands functions and operation of all instruments & controls
-
Adjusts seat and steering position to allow good vision
-
Adjusts mirrors to enable good vision
-
Seatbelt worn and adjusted correctly
Start Engine
-
Checks the park brakes are applied
-
Ensures transmission is in neutral position
-
Sounds horn before engine start
-
Allows diagnostic check to complete before starting
-
Starter released as engine fires
-
No acceleration applied on engine start
-
Checks all gauges for correct operation
-
Full air pressure is obtained before moving off
Drive Off
-
Selects correct gear to avoid clutch shudder
-
Sounds horn before moving off
-
Checks mirror for hazards
-
Releases park brake
-
No acceleration applied on take off
-
Low revs maintained until normal operating temperatures are reached
-
Acceleration is smooth and progressive
-
Forward thrust is not felt during acceleration
Drive Vehicle
-
Gear changes made within operating range of engine
-
Clutch is used when making gear changes
-
Correct sequence is used when making gear changes
-
Obeys all speed restrictions ( built up areas and open roads )
-
Keeps revs low to minimise noise / emissions
-
All braking / slowing is done prior to entering corners and turns
-
Correct gear is selected prior to corners and turns ( to maintain power )
-
Auxiliary brakes are used to conserve brakes
-
Correct operation of power divider in off road / hazardous conditions
-
Good observation techniques are used ( front, rear and to the sides )
-
Both hands are used on the steering wheel
-
Correct use off signals and indicators
Monitor Conditions
-
Correct vehicle positioning is maintained on the road ( open roads / corners & turns )
-
Instruments and gauges are scanned at regular intervals
-
Correct following distance is maintained
-
Hazardous manoeuvres are planned in advance
-
Adjusts speed to suit varying road & environmental conditions
Conduct Water Truck Operations
-
Positions water tank correctly for ease of fill
-
Checks pumping equipment before filling tank
-
Operates pumping equipment to fill tank
-
Shuts down pumping equipment before departing
-
Operates ancillary equipment following company guidelines ( operation of PTO, spray bars, batter sprays etc. )
-
Considers environmental ( weather, traffic volume, road surface and grades etc. ) to determine appropriate speed of travel
Reverse Vehicle
-
Ensures area behind is clear
-
Positions vehicle correctly to allow ease of operation and good vision
-
Selects low gear to maintain control of vehicle
-
Sounds horn before reversing
-
Uses both mirrors to observe progress
-
Does not ride clutch while reversing
-
Park brake is applied
-
Transmission is placed in neutral position
-
Engine brake is turned off
-
Engine is not revved before shut down
-
Adequate time is allowed for the engine to idle / cool down
Sign Off / Authorisation
-
Candidate is assessed as
-
Requires Further Training?
-
Candidate agrees with the outcomes identified within the assessment
-
Authorised trainer / assessor have suitably assessed the candidate and agree with the assessment outcomes