JOB INFO

  • FRAME / INSTALL AREA

  • PROJECT MANAGER

  • CONTRACTOR

  • PROJECT

  • Conducted on

  • FOREMAN

QA/QC

  • GLAZING

  • QA / QC

  • LOCATION
  • Add media

  • FLOOR / ELEVATION / FRAME #

  • PRE-INSTALLATION

  • Add media

  • CHECKED EMBED LAYOUT, CONDITION OF EMBEDS

  • CORRECTIVE ACTION REQUIRED

  • Add media

  • CHECKED AND ACCEPT INSTALLATION AREA BEFORE STARTING WORK

  • CORRECTIVE ACTION REQUIRED

  • Add media

  • DETERMINE PROPER SEQUENCING OF MEMBRANE

  • COMMENT

  • WINDOW SUPPORT SYSTEM INSTALLED TRUE TO APPROVED DETAILS AND ENGINEER'S REQUIREMENTS

  • CORRECTIVE ACTION REQUIRED

  • Add media

  • ELLISDON REPRESENTATIVE

  • FLYNN REPRESENTATIVE

  • INSTALLATION

  • Add media

  • FRAMES ERECTED PLUMB AND LEVEL, OR TO DESIGN SPECIFICATION

  • CORRECTIVE ACTION REQUIRED

  • FRAME ADEQUATELY FITS IN OPENING PROVIDED

  • CORRECTIVE ACTION REQUIRED

  • MATERIALS - ALL MATERIALS ARE AS SPECIFIED, DAMAGE-FREE, AND CORRECT FOR INSTALLATION LOCATION

  • CORRECTIVE ACTION REQUIRED

  • PERIMETER AIR/WATER BARRIER INSTALLED PER INDUSTRY STANDARDS AND APPROVED DETAILS

  • CORRECTIVE ACTION REQUIRED

  • JOINT PLUGS ARE INSTALLED AND PROPERLY SEALED

  • CORRECTIVE ACTION REQUIRED

  • GASKETS ARE INSTALLED, TRIMMED TO LENGTH AND SEALED

  • CORRECTIVE ACTION REQUIRED

  • ELLISDON REPRESENTATIVE

  • FLYNN REPRESENTATIVE

  • SITE GLAZING

  • Add media

  • ALL SURFACES IN ADHESION WITH SEALANTS ARE CLEANED AND PREPPED AS PER MANUFACTURER'S RECOMMENDATIONS

  • CORRECTIVE ACTION REQUIRED

  • GASKETS CLEANED AND JOINERY CAULKED

  • CORRECTIVE ACTION REQUIRED

  • SETTING BLOCKS, GASKETS, AND SHIMS INSTALLED PER DETAIL AND ENGINEERING REQUIREMENTS

  • CORRECTIVE ACTION REQUIRED

  • HEAL CORNER BEADS APPLIED PRIOR TO UNIT INSTALLATION

  • CORRECTIVE ACTION REQUIRED

  • SPANDRELS/BACK PANS INSTALLED AND SEALED AS PER DRAWINGS

  • CORRECTIVE ACTION REQUIRED

  • GLASS CLEARLY MARKED AS INSTALLED (IF IN HIGH RISK OR HIGH TRAFFIC AREAS)

  • CORRECTIVE ACTION REQUIRED

  • MANUFACTURER'S LABELS REMOVED

  • CORRECTIVE ACTION REQUIRED

  • ELLISDON REPRESENTATIVE

  • FLYNN REPRESENTATIVE

  • PRESSURE PLATE, BEAUTY CAP, AND FINISH FLASHING

  • Add media

  • PRESSURE PLATE AND BEAUTY CAP INSTALLED

  • CORRECTIVE ACTION REQUIRED

  • JOINERY SEALED AT ALL PRESSURE PLATE JOINT LOCATIONS

  • CORRECTIVE ACTION REQUIRED

  • FINISH FLASHING INSTALLED PER SPECIFICATION AND DESIGN DRAWINGS

  • CORRECTIVE ACTION REQUIRED

  • ELLISDON REPRESENTATIVE

  • FLYNN REPRESENTATIVE

  • DOOR INSTALLATION

  • Add media

  • DOORS INSTALLED PLUMB, LEVEL, AND SQUARE; COMPONENTS OPERATE SMOOTHLY AND CONSISTENTLY

  • CORRECTIVE ACTION REQUIRED

  • DOOR HARDWARE INSTALLED TO SPECIFICATION AND DESIGN DRAWINGS

  • CORRECTIVE ACTION REQUIRED

  • ELLISDON REPRESENTATIVE

  • FLYNN REPRESENTATIVE

  • VENT INSTALLATION

  • Add media

  • OPENING PREPPED - GASKETS ARE CLEANED / JOINERY CAULKED

  • CORRECTIVE ACTION REQUIRED

  • VENT GASKETS, CAULKING AND SHIMS INSTALLED PER APPROVED DETAIL

  • CORRECTIVE ACTION REQUIRED

  • PERIMETER SEALS INSPECTED (BACKER RODS, CAULKING & CLEAN

  • CORRECTIVE ACTION REQUIRED

  • ELLISDON REPRESENTATIVE

  • FLYNN REPRESENTATIVE

  • SPECIALTY GLAZING

  • Add media

  • SPECIALTY GLAZING

  • OTHER INSTALLATION
  • SPECIALTY ITEMS INSTALLED AS PER SPECIFICATION AND DESIGN REQUIREMENTS

  • CORRECTIVE ACTION REQUIRED

  • ELLISDON REPRESENTATIVE

  • FLYNN REPRESENTATIVE

  • CLADDING

  • QA/QC

  • LOCATION
  • Add media

  • FLOOR / ELEVATION / GRID REFERENCE

  • START UP

  • Add media

  • EXAMINATION - CHECK AND ACCEPT INSTALLATION AREA AND JOB SITE CONDITIONS BEFORE COMMENCING WORK

  • CORRECTIVE ACTION REQUIRED

  • PREPARATIONS - SUBSTRATE IS DRY AND FREE OF MOISTURE, FROST, OIL, AND DUST

  • CORRECTIVE ACTION REQUIRED

  • ELLISDON REPRESENTATIVE

  • FLYNN REPRESENTATIVE

  • MATERIALS

  • Add media

  • MATERIALS USED IN SYSTEM

  • ELLISDON REPRESENTATIVE

  • FLYNN REPRESENTATIVE

  • INSTALLATION

  • Add media

  • VAPOUR BARRIER - LAPPED A MINIMUM OF 50 mm / ENSURE PROPER SHINGLING

  • CORRECTIVE ACTION REQUIRED

  • THRU WALL FLASHING - INSTALLATION OF FLASHING AS SPECIFIED IN THE SHOP DRAWINGS OR AS REQUIRED

  • CORRECTIVE ACTION REQUIRED

  • INSULATION - INSTALLED WITH MINIMAL VOIDS, SAGGING, AND NO OVER COMPRESSION

  • CORRECTIVE ACTION REQUIRED

  • THERMALLY BROKEN CLADDING SUPPORT SYSTEM - INSTALLATION OF SYSTEM AS SPECIFIED IN THE SHOP DRAWINGS OR AS REQUIRED

  • CORRECTIVE ACTION REQUIRED

  • ALUMINUM WALL PANELS - INSTALLED WITH VERTICAL AND HORIZONTAL ALIGNMENT TRUE / PANEL DIMENSIONS MATCH SITE MEASURED CUT SHEETS / FASTENED AS PER ENGINEER'S REQUIREMENTS.

  • CORRECTIVE ACTION REQUIRED

  • METAL WALL PANELS - INSTALLED WITH VERTICAL AND HORIZONTAL ALIGNMENT TRUE / PANEL DIMENSIONS MATCH SITE MEASURED CUT SHEETS / FASTENED AS PER ENGINEER'S REQUIREMENTS.

  • CORRECTIVE ACTION REQUIRED

  • FLASHING - INSTALLED AS PER SHOP DRAWINGS OR AS REQUIRED

  • CORRECTIVE ACTION REQUIRED

  • CLEANING - WORKING AREA IS CLEAN AND ORGANIZED

  • CORRECTIVE ACTION REQUIRED

  • ELLISDON REPRESENTATIVE

  • FLYNN REPRESENTATIVE

The templates available in our Public Library have been created by our customers and employees to help get you started using SafetyCulture's solutions. The templates are intended to be used as hypothetical examples only and should not be used as a substitute for professional advice. You should seek your own professional advice to determine if the use of a template is permissible in your workplace or jurisdiction. You should independently determine whether the template is suitable for your circumstances.