QD -121 Rev C Coating Inspection & Release Note

Basic information

• Project name

• Client

• Project number

• Paint manufacturer(s)

• Corrosion protection work carried out by

• Structure area

• Estimated

• Known

• Constituent element area

• Estimated

• Known

• Inspection area (if not A7 or A8) area

• Estimated

• Known

• Drawing No.

• Position No(s)

• Sketch for identification of inspection area: if applicable, see attached drawing

Protective Paint System

• Surface preparation, ISO 8503-1:

• Surface profile (roughness), ISO 8503-1:

• Substrate (e.g. steel, hot-dip-galvanized):

• Prefabrication primer

• Nominal (specified) dry film thickness (um):

• Priming coat:

• Nominal (specified) dry film thickness (um):

• Intermediate coat:

• Nominal (specified) dry film thickness (um):

• Top coat:

• Nominal (specified) dry film thickness (um):

Measurement/adjustment

• Principle of measurement instrument:

• Measurement instrument:

• Serial no.:

• Range of probe:

• Calibration date

  Date

• Date of measurement:

  Date

• Adjustment:

• Smooth surface

• Rough surface

Acceptance/rejection criteria

• Measurement:

Measurement

• NDFT (Individual coat)

• Cumulative coat

• 80% of Cum. NDFT

• Max. Cum. DFT

Results

• See Measurements Diagrams (Number of measurements taken acc. ISO-19840:2004 Claus 6).

• Number of measurements:

• Number of measurements between NDFT and 80% NDFT:

• Percentage of those measurements compared with the total number of measurements:

• Number of measurements less than 80% NDFT:

• Number of repeated measurements:

• Ambient temperature during the measurement:

• Surface temperature during the measurement:

• Remarks:

• Work according the requirements?

  Yes

  No

• Date:

  Date
• Place:
  Address

• Inspector name(s) (+stamp):

  Sign

• Signature(s):

  Sign