Information

  • Audit Title

  • Document No.

  • Client / Site

  • Conducted on

  • Prepared by

  • Location
  • Personnel

Crew/Individuals Performing CFS Framing and Erection

  • Provide crew or individual's name(s) that performed/overseen the framing and detailing of the structure.

Roof Uplift Holdown Strap Installation

  • Are all "Roof Uplift Connections" applied as per details 1,3+4/CF400?

  • Engineer's comments.

  • Photo of corrective actions to resolve issue (as needed)

  • Resolution comments (as needed)

Joist Alignment Over E2 walls and Wall Top Track Connection to Bottom of Joist

  • Is joist aligned and fastened to top of walls per detail 3/CF400?

  • Engineer's comments.

  • Photo of corrective actions to resolve issue (as needed)

  • Resolution comments (as needed)

G2 Girder Angle Clip Connection from Cantilever Rim-Channel to G2 Web

  • Is the rim-channel attached to cantilevered G2 girder with clip angles as per elevation 2/CF201?

  • Engineer's comments.

  • Photo of corrective actions to resolve issue (as needed)

  • Resolution comments (as needed)

Joist Block Installed in the 1st Interior Joist Bay near the Mid-point of the E2 Walls

  • Is joist blocking provided above the exterior walls as per plan and applied per detail 5/CF400?

  • Engineer's comments.

  • Photo of corrective actions to resolve issue (as needed)

  • Resolution comments (as needed)

Kitchen Roof Uplift via Angle Clips in lieu of Flat Strap

  • Were clip angles applied below the kitchen roof as per detail 2/CF401?

  • Engineer's comments.

  • Photo of corrective actions to resolve issue (as needed)

  • Resolution comments (as needed)

Cantilever Joist Web Stiffeners

  • Do all cantilevered joist have web stiffeners applied per detail 2/CF400?

  • Engineer's comments.

  • Photo of corrective actions to resolve issue (as needed)

  • Resolution comments (as needed)

Back-to-Back Rim-Channel Cantilever Angle Clip Seat where there is a Bearing Gap

  • Were clip angles applied at top of wall below cantilevered back to back rim track to close the gap as per details 3+6/CF400?

  • Engineer's comments.

  • Photo of corrective actions to resolve issue (as needed)

  • Resolution comments (as needed)

Wall Bottom Track Connections to Foundation at Studs and Jambs

  • Are the bottom wall tracks fastened to the foundation at specific locations as per detail 1/CF500?

  • Engineer's comments.

  • Photo of corrective actions to resolve issue (as needed)

  • Resolution comments (as needed)

Sheathing Fasteners to all Posts & Jambs in addition to O.C. Studs and Cripplers

  • Are the exterior and interior sheathing materials fastened to the CFS structure per detail 4/CF501?

  • Engineer's comments.

  • Photo of corrective actions to resolve issue (as needed)

  • Resolution comments (as needed)

Post Holdown Brackets and Concrete Anchors

  • Are all post holdown brackets applied and anchored to the foundation as per details 2+3/CF501?

  • Engineer's comments.

  • Photo of corrective actions to resolve issue (as needed)

  • Resolution comments (as needed)

Direct Fasten Metal Roof Fasteners and Fastener Pattern

  • Is the metal roof direct fastened to the roof framing members as per detail 1/CF501?

  • Engineer's comments.

  • Photo of corrective actions to resolve issue (as needed)

  • Resolution comments (as needed)

General Delivered Cold-Formed Steel Material Type, Thickness, and Galvanizing or Painting for Studs, Joist, Track and Metal Roof Deck

  • Are Cold-Formed material type, thickness, galvanization, and paint thickness certifications available for stud, track and metal roof deck?

  • Engineer's comments.

  • Photo of corrective actions to resolve issue (as needed)

  • Resolution comments (as needed)

Quality Control Inspection Sign-off:

  • Inspection Completed by:

The templates available in our Public Library have been created by our customers and employees to help get you started using SafetyCulture's solutions. The templates are intended to be used as hypothetical examples only and should not be used as a substitute for professional advice. You should seek your own professional advice to determine if the use of a template is permissible in your workplace or jurisdiction. You should independently determine whether the template is suitable for your circumstances.