Title Page

  • Conducted on

  • Prepared by

Checks

GENERAL CHECKS

  • AHU No. and area served

  • Is the unit and associated plant secure from unauthorised access?

  • Comment

  • Is the unit safely safely accessible for inspection and maintenance ?

  • Comment

RUNNING CHECKS

  • Plant Running?

  • Comment

  • Is the air intake positioned to avoid short circuiting with extract or foul air from other sources?

  • Are all inspection lights working?

  • Are motorised dampers fitted to the intake?

  • Are motorised dampers fitted to the discharge?

  • Are the fan motors outside of the air stream ?

  • Is the fan drive train visible without removing covers?

  • Is the Cooling coil located on the Discharge side of the fan?

  • Is There an Energy Recovery System fitted ?

  • Type

  • Are condensate drains fitted to all energy recovery stsems, cooling coild and himidifiers?

  • Comment

  • Are Drainage traps clean and filled with water ?

  • Is the drain trap air break greater than 15mm?

  • Drainage Traps cleaned and refilled?

  • Is the drain trap air break greater than 15mm?

  • Is the drain trap air break greater than 15mm?

  • Humidifier fitted?

  • Is the Humidifier capable of running?

  • Is there space to safely change the filters?

  • Are there test holes within the principle ducts within the plant room?

  • Are the Test Holes Capped?

  • What is the condition of the general exterior of the AHU

  • Are the principal ducts lagged?

  • What is the general condition of the associated valves and pipework?

  • Is the Pipework adequately lagged?

  • Is the System clearly labeled?

  • Pre Filter Differential pressure reading

  • Secondary Filter Differential pressure reading

  • Extract Filter Differential pressure reading

UNIT ISOLATED CHECKS

  • Are you able to shutdown plant?

  • Comment

  • Comment

  • Did Intake motorised damper close on plant shutdown?

  • Did Discharge motorised damper close on plant shutdown?

  • Is the vermin/Insect Screen Clean?

  • Is the Intake section including fog coil Clean?

  • Are the Pre Filters correctly fitted with no air bypass

  • Are drive belts correctly aligned and tensioned?

  • Comment

  • Is the cooling matrix clean?

  • Are All drip trays fully accessible or capable of being removed for cleaning with a fail to drain ?

  • Are Drainage Trays Stainless?

  • Are Drainage Trays clean?

  • Are drainage trays clean?

  • Are drainage trays stainless?

  • Are drainage trays clean?

  • Are drainage trays clean?

  • Is the AHU free from signs of water ponding?

  • Is the matrix clear for each heater battery?

  • Have the main filters been fitted correctly with no air bypass?

  • Have the Extract filters been correctly fitted with no air bypass?

  • Is the AHU and its associated ductwork clean internally?

Restart Plant

  • Did the unit restart satisfactory?

  • Comment

  • Automatic changeover motor set up present on unit?

  • Did automatic changeover operate satisfactorily?

  • Comment

Additional comments

  • Comment

  • Signature

The templates available in our Public Library have been created by our customers and employees to help get you started using SafetyCulture's solutions. The templates are intended to be used as hypothetical examples only and should not be used as a substitute for professional advice. You should seek your own professional advice to determine if the use of a template is permissible in your workplace or jurisdiction. You should independently determine whether the template is suitable for your circumstances.