• LMC has had chip seal applied

  • Is Formwork checked with survey, adequately supported, mortar tight and deboned ?

  • Is pour area is and free from loose or foreign material?

  • Surface is in a damp condition and free from pounding water?

  • Saw cutting crew on standby for saw cutting works

  • Reinforcement and tie bars located as per drawings/specifications

  • Pre-Pour inspection conducted by Main Contractor

  • Weather for paving to start:
    - Air temp between 5 degrees and 36 degrees
    - Not raining nor imminent

  • Concrete deposited and spread uniformly without segregation

  • All loads formed within appropriate time
    - 90min for air temp <30degrees
    - 45min for air temp >30degrees

  • Concrete temp when sampled is between 10 degrees and 32 degrees

  • The base surface finish has a uniform, dense, compact finish

  • Tine finish applied

  • Curing compound applied at required rate and has created a continuous and unbroken film over the Subbase

  • Has the start-end/stop-end been checked for straight edge and alignment conformance

  • Has all waste/spoil been cleaned up

The templates available in our Public Library have been created by our customers and employees to help get you started using SafetyCulture's solutions. The templates are intended to be used as hypothetical examples only and should not be used as a substitute for professional advice. You should seek your own professional advice to determine if the use of a template is permissible in your workplace or jurisdiction. Any ratings or scores displayed in our Public Library have not been verified by SafetyCulture for accuracy. Users of our platform may provide a rating or score that is incorrect or misleading. You should independently determine whether the template is suitable for your circumstances. You can use our Public Library to search based on criteria such as industry and subject matter. Search results are based on their relevance to your search and other criteria. We may feature checklists based on subject matters we think may be of interest to our customers.