Title Page
-
Site conducted
-
Machine type
-
Rotation hour meter
-
Trust hour meter
-
Conducted on
-
Prepared by
-
Current Project supervisor
-
Location
-
Doc Number
DRIVE MOTOR TEMPS
-
Hourly inspections to be done while machine is at operating temperatures.Take at least one measurement per rod drilled while reaming.
-
1. CA70 - Top bearing temp
-
2. CA70 - Bottom bearing temp
-
3. CA210 - Top bearing temp
-
4. CA210 - Bottom bearing temp
-
Upload drive motor thermal imaging photos
DRIVE TRAIN TEMPS
-
Hourly inspections to be done while machine is at operating temperatures.Take at least one measurement per rod drilled while reaming.
-
1. 1ST Reduction bearing temp
-
2. 2ND Reduction bearing temp
-
3. Reaming thrust bearing temp
-
4. Pilot thrust bearing temp
-
Upload drive train thermal imaging photos
LUBE INSPECTIONS
-
Hourly inspections to be done while machine is at operating temperatures.Take at least one measurement per rod drilled while reaming.
-
1. Lube oil temp
-
2. Lube oil flow
DRIVE PACK TEMPS
-
Hourly inspections to be done while machine is at operating temperatures.Take at least one measurement per rod drilled while reaming.
-
1. Drive pump 1 - Case temp
-
2. Drive pump 2 - Case temp
-
3. Motor PT100 reading
-
4. Oil temp (Tank)
-
5. Oil temp (Discharge line)
-
Upload drive pack thermal imaging photos
-
What is the drive pack's Case flow?
TRUST PACK TEMPS
-
Hourly inspections to be done while machine is at operating temperatures.Take at least one measurement per rod drilled while reaming.
-
1. Thrust pump 1 - Case temp
-
2. Thrust pump 2 - Case temp
-
3. Thrust pack Motor PT100 reading
-
4. Thrust pack Oil temp (Tank)
-
Upload thrust pack thermal imaging photos
Sign Off
-
Person conduct hourly check sign off
