Is there a Health & Safety Site File on Site?
Does file contain method statement & risk assessment?
Have site operatives read and signed to confirm they have understood and agree with method statement & risk assessment?
Are emergency contacts for site and Response management provided in file?
Is the Response Insurance Certification available in file?
Is the training portfolios and or training certification for the site operatives available within file?
Is the test certificates for all site equipment available within site file, i.e. PATs records and Lifting Equipment ?
Where applicable are COSHH data sheets available for products being used?
Is the Authorisation to Proceed / Permit to Work from the site management available within file?
Have the site operatives completed a work safe risk assessment and hold a signed method statement by all members of the site team?
Have all relevant hazards been identified within this paperwork?
Are all agreed control measures in place as per method statement?
Have the operatives obtained all relevant site permissions such as permit to work, isolation certificate, safe working procedure?
If so, have they been completed correctly and all relevant personnel have signed to confirm their understanding and acceptance of these documents?
Where applicable has all relevant sections of the plant being worked upon been isolated and locked off by all operatives involved in this work?
Are all operatives suitably trained for the tasks to be completed?
Is the correct PPE available and being used by all operatives where necessary?
Is the PPE being used in a good serviceable condition?
Is the work area ring fenced / cordoned off to prevent unauthorised access?
Are all unused equipment / tools stored sensibly?
Is a copy of the HAV's assessment and safe working levels chart available / held in the site vehicle?
Are all edges protected?
Is all access equipment being used certificated and suitable for task required?
Are all ladders being used of industrial grade and registered?
If required are operatives trained to erect portable scaffold tower?
Is scaffolding tagged and fit for use if being used?
Has hired in plant / mobile access platform been inspected and deemed suitable for use with inspection recorded in method statement?
Do operatives have and are they using full safety harnesses where needed?
Is a complete confined space kit on site for works to be tackled, specifically 3 x gas monitors, full arrest / recovery block, harness, 110v lighting?
Are gas monitors calibrated and in service date?
Are all operatives trained to complete confined space work?
Is a rescue plan in place to effect recovery in the event of an emergency?
Is a rescue stretcher available on site?
Has all lifting equipment been inspected before use and displaying correct colour tag?
Are operatives trained to complete lifting operations?
For crane operations, has lifting plan and crane check sheets been completed by allocated AP?
Has weather and ground conditions been assed for safe cranage operation?
Has hot work equipment been inspected prior to use and deemed fit for use?
Are operatives trained / competent to complete works required?
Is the correct PPE available and being used?
Is there a fire extinguisher set close to work area and or fire blankets being used?
Is the work / floor area clear from tripping hazards?
Are all large of awkward items being stored safely so as not to present a hazard?
Are unsafe areas condoned off to prevent access?
Are all vehicles safely positioned?
Is all waste /scrap being safely collected and disposed off or positioned in a safe area ready for removal on completion of works?
Are all COSHH substances stored safely and securely?
Is there standing water in the work area?
If so can it be cleared away or infilled to remove hazard?
Is salt or grit available to treat areas of ice or snow?
Is the work being completed on schedule?
Is the quality of work being completed to the expected standard?
Are all necessary plant, tools, equipment and materials available to allow work to be completed?
Is effective communication being maintained with customer / client?
Are all site rules and procedures being observed?
Is site vehicle in a clean and well maintained condition, drivers area and tool area?
Is flashing beacon working and in use?
Is buggy whip flag fitted and in use?
Is a first aid kit available and is it stocked with eye wash (in date), burn spray, plasters and bandages?
Is welding plant in place and operating satisfactorily ?
Record welding plant running hours for service planning:
Is burning equipment in a safe and operational condition from cylinders through to burning nozzle?
Chain Block (min one x 1ton)
Pull lift (min one x 3/4ton)
Colour coded 2t x 2m strops
Colour coded 1ton x 1m strops
4 3/4" grinder
110v work lights
Combi breaker / drill
Safety harness, lanyard and scaffold hook
Full face visor and helmet
Access ladder / step ladder
PPE, including wet weather clothing, safety boots, gloves, gauntlets, safety glasses, ear defenders, dust masks, safety helmet, probably overalls?