Information
-
Site Number
-
City, State
-
Conducted on
-
Plant Manager
-
Prepared by
Final Product Inspection
Quality Verifications (max 10)
-
Add Unit
Unit
-
Photograph Unit
-
Photograph Unit Label
-
Confirm no loose edges of repair units.
-
Improvement Item?
-
Improvement to be completed by:
-
Confirm beads are not damaged or distorted (PSMR Section 1-2-1-01).
-
Improvement Item?
-
Improvement to be completed by:
-
Confirm bead repairs are smooth (RMA 2 or less) and even with surrounding surface.
-
Improvement Item?
-
Improvement to be completed by:
-
Confirm no radial or diagonal cracking on casing sidewall
-
Improvement Item?
-
Improvement to be completed by:
-
Confirm tires are clearly and permanently marked with dealer's DOT code and current date. For Canada, must also contain the letter "R" in 1/4" (6mm) high letters.
-
Improvement Item?
-
Improvement to be completed by:
-
Confirm tread bond line exhibits good cushion flow. No squared edges or diamond imprint in cushion. Continuous flow on both sides extending a minimum of 1/8" (3 mm) beyond tread edge. Ref. PSMR Doc. 1-1-1-15-2-11
-
Improvement Item?
-
Improvement to be completed by:
-
Confirm no more than 1/2" (13mm) of void exists under the tread edge.
-
Improvement Item?
-
Improvement to be completed by:
-
Confirm no gapped tread splices greater than 0.030" (0.8mm) wide.
-
Improvement Item?
-
Improvement to be completed by:
-
Confirm tread size is consistent with Tire Facts or, for those tires not listed in Tire Facts, is consistent with the tread size determined in PSMR Section 6 of the Buff Tire operation (For radial tires see PSMR Document #11103, and for bias tires see PSMR Document #14102). Take picture if tread width does not match Tire Facts.
-
Improvement Item?
-
Improvement to be completed by:
-
Confirm all injuries requiring repair (other than bead damage in 70-4) are completed per repair specificaions.
-
Improvement Item?
-
Improvement to be completed by:
-
Confirm tread is centered within 3/16" (5 mm) as measured from a design feature.
-
Improvement Item?
-
Improvement to be completed by:
-
Confirm tires are free of foreign material inside and out (nails, staples, stones, metal tags, repair supports, etc.).
-
Improvement Item?
-
Improvement to be completed by:
-
Confirm no visible tread distortion greater than 1/8" (3 mm) out of normal position, such as lug pitching, void/sipe closing, or undertread distortion.
-
Improvement Item?
-
Improvement to be completed by:
