Riber Surveillance Limited

• Customer's Name

• Customer's Phone No.

• Date & Time Attended

  Date

• Prepared by

• Customer's Address
  Address

GENERAL INFORMATION

• Transmitter Type

• Software

• Remote Signalling Make/Type

• Site Contact

• Telephone No.

ROUTINE INTERM MAINTENANCE CHECKLIST (interim Inspection Visit)

• Check with customer for any problems with system or alterations to site.

  Yes

  No

  N/A

• Visually check the installation for any signs of damage

  Yes

  No

  N/A

• Remove all Movement Detector housing covers and check/Clean

  Yes

  No

  N/A

• Check all movement detection for correct operation

  Yes

  No

  N/A

• Silicon seal top of Movement Detection to prevent water ingress

  Yes

  No

  N/A

• Check all camera for correct operation

  Yes

  No

  N/A

• Clean all camera viewing windows/Bubble (outside)

  Yes

  No

  N/A

• Check PTZ Domes for correct operation - Respond to alarm inputs

  Yes

  No

  N/A

• Test transmitting equipment to ARC. Check secondary path if applicable

  Yes

  No

  N/A

• ARC to make test Audio announcement to site

  Yes

  No

  N/A

• Check Recording Device for correct operation

  Yes

  No

  N/A

• Check all UPS for correct operation Date unit.

  Yes

  No

  N/A

• Change UPS with Service replacement if 2 years or more old

  Yes

  No

  N/A

• Check all Low Voltage Power supply for correct operation. Date unit.

  Yes

  No

  N/A

• Check all flexible connection

  Yes

  No

  N/A

• Instruct customer on walk testing system regularly

  Yes

  No

  N/A

• Check that Time and Date are correct

  Yes

  No

  N/A

• Fill System/Site Historical Record - Issue new Record if not available

  Yes

  No

  N/A

• Remove all camera housing covers and check/Clean (inside)

  Yes

  No

  N/A

• Check all connections at camera for signs of corrosion

  Yes

  No

  N/A

• Walk Test all Movement Detection. Check that range is correct.

  Yes

  No

  N/A

• Replace Batteries in all Wireless Detection Devices

  Yes

  No

  N/A

• Check correct operation of all wireless devices through to Receiver

  Yes

  No

  N/A

• Check all connections at Detection device for signs of corrosion

  Yes

  No

  N/A

• Check with ARC that all alarm devices trigger the correct camera/preset

  Yes

  No

  N/A

• Check and clean all monitors

  Yes

  No

  N/A

• Check output Voltages on low voltage power supply

  Yes

  No

  N/A

• Check all fuses for correct value

  Yes

  No

  N/A

• Check all connections at the control equipment

  Yes

  No

  N/A

• Replace Waning signs if damaged or deteriorated

  Yes

  No

  N/A

• Check setting/unsetting procedures

  Yes

  No

  N/A

SIGN OFF

• Only the part of the system worked upon has been tested

  Yes

  No

• The system has been tested and left in good working order

  Yes

  No

• Time of Departure

  Date

• Travel Time

• Engineer's Name & Signature

  Sign

• Customer's Name & Signature

  Sign