Information
-
Richard Group LLC Daily Safety Inspection
-
Document No.
-
Client / Site
-
Conducted on
-
Prepared by
-
Location
-
Personnel
Site Inspection
Site Documentation
-
2. All employees and (sub)contractor personnel on site completed Richard Group LLC Site Safety Oriention?
-
3. Weekly VA-OAC meetings being held?
-
4. Site safety inspections are occurring daily?
-
5. Construction Prep meetings held with Contractors & subcontractors when applicable.
-
8. Safety issues raised at daily Pre-starts or toolbox meetings have been noted and addressed?
-
9. Toolbox for the site are occurring weekly - contractors crews are attending.
-
10. TMP is in place & has been reviewed & updated as required. (ie. Restricted Access, exclusion zones, traffic control) Check plans, diary for entries to ensure personnel working on VA Medical Center campus & the public vehicles and pedestrians are safe?
-
11. Corrective actions from prior S.A.F.E. & weekly inspections have been addressed?
Safety - Environmental
-
12. A site Soil Erosion Plan is in place?
-
Safe Work Method Statements
-
13. Project specific documentation for soil erosion for all after weather events on site? (i.e. rain, snow, flood).
-
14. All daily Job Hazard Analysis (JHA) are completed, reviewed, and signed by contractor crew members and turned over to RG Safety Officer/SSHO.
-
16. All contractors/subcontractors work tasks are performed by and approved under DFOW & Activity Hazard Analysis (AHA) approved & signed by RG SSHO.
-
High Risk Tasks on site
-
18. Is there any work in Confined Space?
-
19. Is there any Hot Work being performed? (Welding / spark emitting)
-
20. Work at Heights being performed? (where one could fall >1.8 metre)
-
21. Excavations /Trenching works being performed?
-
22. Underground / Overhead services clearly identified if present prior to work starting?
-
23. All Competent Persons (CP) on site have an up-to-date OSHA 30 card, & all others have an OSHA 10. Is everyone fit for work?
-
25. Emergency Response Plan in place and understood, have Emergency Assembly Areas been identified?
-
26. Are emergency contact numbers available to personnel on site? (ICE in contacts of phone)
-
27. Are there any special Environmental / Cultural Heritage considerations for this project?
-
28. Have site personnel been made aware of environmental restricted areas and controls if applicable?
-
29. Have appropriate material / waste / spoil stockpiles / disposal bins been identified, present & risk assessed?
-
30. Stocked First Aid kits & a minimum of 1 certified first aider on site? (ensure that the kit supplies within "used by date")
-
31. Fire extinguishers on site, well signed and been serviced in the last 6 months? (include job site trailer extinguishers)
-
32. Are spill kits required, available on site with instructions for use and operators trained in their use/application?
-
33. SDS sheets and register on site?
-
34. Hazardous substances and dangerous goods clearly identified (labels) and correctly stored?
-
35. Health monitoring required - Asbestos & lead exposure.
-
36. PPE review - all personnel including subcontractors wearing the minimum and appropriate PPE for the job?
-
37. Site supervisor adequate for project task? (include subcontractor supervision review)
-
38. Evidence of unreported incidents - environmental (spills, emissions, noise, impact on native vegetation or wildlife habitat), property damage or personnel injury?
Site and Facilities
-
39. Site layout effective & allow effective access & egress to site & work zones.
-
40. Site signage appropriate - visible, accurate?
-
41. Vehicle movement plan, including parking arrangements for contractor / equipment, segregation of pedestrians effective?
-
42. Site facilities appropriate - fresh drinking water, toilets, shade, extreme weather protection?
-
43. Company policies, committee meeting minutes, emergency evacuation, etc notices are posted in RG job trailer?
-
45. Are all lifting chains on site certified and tagged with SWL listed Tags & noncomplying chains remove from use. Lifting equipment inspected & tagged in past 6 moths?
-
46. Are all contractor equipment fit for purpose, have compliance plates, registered, audible alarms, flashing lights & are used within manufacturer's requirements? Tag out noncomplying equipment & remove from use.
-
47. Electrical equipment have been tagged and tested (not expired)?
-
48. Extension leads, cables, hoses, etc are set up appropriately ( off ground and free from potential damage)?
-
49. Fuse box for temporary generator(s) in use or portable generators have GFCIs for all portable electrical equipment? VRDS used on arc welders where appropriate?
-
50. Potential or likely sources of ignition near flammable liquids or gas been removed?
-
51. Site been assessed for potential or likely exposure to infectious substances (needle sticks)?
-
52. Has the fire danger rating been considered and appropriate controls put in place?
-
Other Observations?
-
Signature of person inspecting
-
Signature of supervisor on site