Information

  • Document No.

  • Site Details:

  • Client

  • Conducted on

  • Prepared by

  • Location
  • Personnel

Traffic Control at Work Site Safety Inspection checklist

  • Contractor

  • TCP No

  • Road / Bridge Name

  • Type of Work

  • Road Configuration

  • Site Supervisor

Guidance Notes

  • 1. Detailed inspection using this checklist shall only be undertaken by personnel holding current design & inspect traffic control certificate or auditers accreditation.
    2. Report to site office or most senior person & attend site induction or be escorted..
    3. Desk-Top "Audit". Review paperwork & discuss site conditions, to complete Column 1. Check items against TCP &associated documents.
    4. Site inspection. Conduct site verification inspection, discussing issues with random site workers / operators, to complete Columns 2 - What you see on site.
    5.Complete your report on site, where possible.
    6.if you are able make a copy of the report on site, leave a copy with supervisor.
    7. For Contractor site, forward an electronic copy to Contractors Safety Manager, WH&S Branch.

Conditions

  • Does the work require T.C.P.

  • Does the work require V.M.P.

  • Does the work require P.M.P.

  • Is the approved plan on site?

  • Have signs & devices been set out as in the T.C.P.

  • If Modifications have been made are they been approved & marked on the T.C.P.

  • Does the RA Cover the risks assosiated with the work site ?

  • Has a Road Occupancy Licence been issued & is it being complied with ?

  • Are the requirements implimented for safe clearances to workers & pedestrian & traffic approach speeds ?

Traffic Controllers ( TCS )

  • Is the correct number of TC's being used ?

  • Have TC Certificates been sighted and recorded ?<br>

  • Is TC's high visibility clothing in good repair ?

  • Do TC's have a clear escape route ?

  • Are Prepare To Stop (TI-I8) and Traffic Controller Ahead (TI-34, TI-200-2/3) signs correctly displayed ?

  • Are the above signs covered or removed when not required ?

  • Do they have correct communication ?

Flashing Arrow Signs (FAS)

  • Is a FAS Being used ?

  • Is the FAS being used marked as complying with RMS either specification FAS/4 or FAS/5?

  • Is it located correctly ?

  • Is the correct Mode of Operation being used ?

Variable Message Sign (VMS)

  • Is a variable message sign being used, as specified in TCWS ?

  • Is the sign located in safe position ?

Sign & Devices

  • Are all signs & devices in good condition ?

  • Are all signs clearly visible & not affected by other signs, plant items, vegetation, shade, light glare etc ?

  • Are sign faces in compliance with AS1742.3 and have class 1 retro reflective material ?

  • Are the signs erected to give the correct sign distance ?

  • Are signs duplicated, where required ?

  • Have the needs of pedestrians been provided for ?

  • Have the needs of cyclists been provided for ?

  • Are all property accesses to the site controlled ?

  • Are all cones & bollards installed at the correct spacing ?

  • Auditor

  • Select date

  • Manager

  • Select date

The templates available in our Public Library have been created by our customers and employees to help get you started using SafetyCulture's solutions. The templates are intended to be used as hypothetical examples only and should not be used as a substitute for professional advice. You should seek your own professional advice to determine if the use of a template is permissible in your workplace or jurisdiction. You should independently determine whether the template is suitable for your circumstances.