Title Page
-
Site conducted
-
Conducted on
-
Prepared by
-
Location
-
Owner / contractor name
-
Plant description
-
Plant registration No.
-
Dry or Wet Hire
-
Current hours
-
Next service due hours
-
Road worthy / registration / machinery certificate - expiry date
MANDATORY - REQUIRED FOR ALL ITEMS OF PLANT ON A ROADTEK SITE
-
Seat belt(s) are fitted, lights (head, reverse, stop, tail, indicators, rotating)
-
Reversing beeper and horn operational
-
Maximum operating height and reach of plant (for exclusion zones)
-
Vertical reach
-
Horizontal reach
-
Any lifting chains/slings/points or equipment that are to be used: tested, tagged, certified and in date
-
Machinery guard(s) are fitted and secured, where applicable
-
Anchorage points for fall arrest rated (If applicable)
-
Hose burst protection is fitted if plant item is to be used in crane mode to lift loads over 1tonne
-
Visual check of tyres/tracks, wheel nut indicators (if fitted): In comments, describe the condition. Are the tyres/tracks free of obvious defects?
-
UHF radio or other type communication (If applicable)
-
Noise rating of plant available to operator
-
Check for valid registration, logbooks, operator's manual & defect book, maintenance and service regime.
-
Daily operator plant specific checklist is provided and there is a requirement and area for the operator to sign off these are being done daily (Must have all items)
-
Biosecurity hygiene form provided
-
Plant risk assessment provided
Plant/ Equipment Specific
-
EPWs
-
Evidence of all types of EWP inspections:<br>- Routine inspections: at least every 3 months<br>- Periodic inspections: at least every 12 months<br>- Major inspections: at least after 10 years of service, and every 5 years thereafter
-
Earthmoving Equipment
-
If plant is earthmoving equipment, where required, is fitted with roll over protection (ROPS) and/or falling<br>objects protection (FOPS) and fitted with a compliance plate stating it’s compliance to AS 2294 (alternative<br>compliance may be ROPS- ISO 3471, SAE J1040 or FOPS -ISO 3449, SAE J231 or J 1043 or TOPS AS 4987 or<br>ISO 12117)
-
The person with management or control of earthmoving
machinery at a workplace must ensure that the machinery is
NOT used unless it is securely fitted with a protective structure
(ROPS & FOPS) and fitted with a compliance plate. -
Concrete Pumping Equipment
-
Concrete pumping equipment is fitted with the required compliance plates.<br>Placing boom and outriggers: manufacturer fixed plate, annual and six yearly inspection date fixed plate. Concrete<br>pump: manufacturer specification fixed plate.<br>If applicable: over length and overweight permits, fixed motor vehicle modification plate showing any applicable<br>modification codes.
-
PREFERABLE - FOR ALL ITEMS OF PLANT ON A ROADTEK SITE.
-
Consider the risk of these items not being on the plant (or checked) and document.
-
Check for obvious leaks of hydraulic fluid or water
-
Mounting / access step(s), ladders, work platforms fitted, appear in good working order
-
Trailer coupling device secure and fitted with safety chains (If applicable)
-
Mirrors
-
Fire extinguishers – Are they fitted and in Date?
Walk around plant and list existing defects / hire conditions / general conditions: (body panels, paint, cutting edges and teeth, general damage)
-
Details
-
Approval for use on site
- Approved for use on-site
- Approved for use with minor changes/documents to be submitted
- Not Approved
-
Inspected By
-
Plant Owner/Operator
