Job site photo's.
Have all previous issues been cleared?
Are First Aid kits readily available?
Quick drenching or flushing available where the eyes or body may be exposed to injurious corrosive materials?
Documentation of at least 1 person trained in First Aid?
Weekly Toolbox Talks documented?
Walkways clear and work area clean and orderly?
Proper body position when lifting?
Lasers operating properly and warning signs posted?
Have all isues identified today been corrected?
MSDS Chemical Inventory list and SDS available upon request?
All containers properly labeled?
Written program available upon request?
Training regarding the new label elements and safety data sheets format by 12/1/2013?
Are employees wearing proper PPE for task? (glasses, hard hat, respiratory protection, gloves)
PPE inspected and in safe condition?
Is hearing protection required?
Are adequate fire extinguishers provided? (100' of travel & 3000 sq. ft.)
Are fire extinguishers available near fuel storage area (25'-75')?
Are extinguishers inspected at start of shift?
Are fire extinguisher inspections up to date?
Are flammable materials stored properly?
Is fuel storage area protected from vehicular traffic?
Flammable liquid containers OSHA approved? (metal w/ labels)
Is "No Smoking" signage present near fuel storage
OSHA and Jobsite Posters present?
Is OSHA Log Posted (Feb 1 - April 30)
Proper signage present?
Are barricades and traffic control devices available and being used properly?
Rigging inspected prior to use?
Rigging properly used?
Safety latches in place and free of damage?
Is rigging properly protected from sharp edges?
Materials properly stored?
Shakeout hooks in proper condition?
Good housekeeping practices in place?
Hand tools in good conition?(taped/cracked handles)
Power tools have required guards?
Tool lanyards on all tools?
Employee properly trained to operate Powder Actuated Tools?
Powder Actuated Tools not loaded and left unattended, and proper clean-up of cartridges?
Bolt bags in good condition (no holes)?
Leads in good condition and weld machine properly grounded?
Power tool cords in good condition?
Is Hot Work Perimt required?
Area free of flammable and combustibles within 35 feet
Fire protection equipment readily available?
Proper PPE in use?
Are bottles stored properly?
Regulators free of damage and flashback arrestors in use?
Grinder used properly and handle and guard being used properly?
GFCI or Assured Grounding Program in use?
Is temporary lighting available and properly protected?
Have electrical panels been protected?
Extension cords in proper condition? (ground prong/electrical tape)
Extension cords protected from traffic?
Is a Lo/To procedure in place?
Scaffolding inspected and tagged?
Scaffolding not over loaded?
Wheels on rolling scaffolding locked while in use?
Scaffolding fully decked?
Fall protection in use during assembly and dismantling?
Proper access provided?
All components of Fall Proction equipment inspected before each use?
Impalement protection provided?
Is handrail or perimeter cable properly installed?
Employees using proper anchorage?
Hole and floor coveres properly installed?
Proper connection used for tie off?
Retractable lifelines properly used?
Crane operators license current and copy on file?
Did the operator conduct a visually inspection prior to shift and record on log?
Crane properly set-up? Outriggers used correctly? Mats/stabilizer pads in good condition?
Swing radius barricaded?
Proper distance to energized power lines maintained?
Load chart available?
Anti 2-block functioning?
Cab glass in good condition?
Have operators been properly trained?
Employees wearing seat belts while operating?
Glass free from obstructions?(clean/cracks)
Back up alarms functional?
Proper tie off inside baskets?
Employees not working under suspended loads?
Has Site Specific erection plan been provided?
100% Fall protection over 6 feet?
Perimiter safety handrail installed properly?
Wire rope hand rail flagged off?
Less than 3" slack in handrail?
Single span and Cantilever sheets properly welded?
Loose bundles tied down to prevent movement?
Proper access provided for elevation change > 19"?
Is the proper ladder for the job being used?
Job built ladders constructed according to ANSI standards?
Are stairways free of obstructions?(including cords)
Are walking/working surfaces free from obstructions?
Ladders secured and extend 36" above landing?
Is ladder at proper pitch? (4:1 ratio)