Information

  • Site conducted

  • ANNUAL KIT INSPECTION FOR;

  • Document No.

  • Conducted on

  • Prepared by

  • Select date

HARNESS

  • ID label present and legible

  • SERIAL NUMBER

  • Date of manufacture

  • Webbing<br>Inspect the entire length of all the webbing looking for frayed edges, broken fibers, pulled stitches, cuts, burns and chemical damage. Also look for mildew, discoloration, hard shiny spots, any webbing that has been marked with a felt pen, excessive hardness or brittleness or the Harness Fall Indicator deployment.

  • Stitching <br>Check all stitching for ripped or pulled stitches and to make sure the webbing joints are not loose. Also look for missing stitching, hard or shiny spots, or discoloration of stitching.

  • D-rings<br>Check D-rings for rust or corrosion, distortion, cracks, breaks, and rough or sharp edges. D-rings should pivot freely.

  • Buckles<br>note any unusual wear, damage or distortion. On tongue buckles check that the roller and tongue move freely and that the tongue overlaps the buckle frame. Check the outer and center bars on friction and mating buckles for distortion. On quick release types check for broken plastic and that they will not release when one release is opened. Mating buckles should nest together.

  • Expiry Date

  • Harness is approved for use at time of inspection.

COWSTAIL

  • Is ID label present & legible

  • SERIAL NUMBER

  • Manufacture Date

  • Webbing<br>Inspect the entire length of all the webbing looking for frayed edges, broken fibers, pulled stitches, cuts, burns and chemical damage. Also look for mildew, discoloration, hard shiny spots, any webbing that has been marked with a felt pen, excessive hardness or brittleness or the Harness Fall Indicator deployment.

  • Metal components free from damage or deformity.

  • Karabiner mechanisms intact and in good working order.

  • Expiry Date

  • Cowstail is approved for use at time of inspection.

8 METRE ROPE

  • Is ID label present & legible

  • SERIAL NUMBER

  • Manufacture Date

  • Rope<br>Inspect the entire length of all the rope looking for frayed edges, broken fibres, pulled stitches, cuts, burns and chemical damage. Also look for mildew, discoloration, hard shiny spots, any rope that has been marked with a felt pen, excessive hardness

  • Connecting device;<br>Ensure manucroche is free from damage or deformity and that it opens and closes freely.

  • Expiry Date

  • Rope is approved for use at time of inspection.

10 METRE ROPE

  • Is ID label present & legible

  • SERIAL NUMBER

  • Manufacture Date

  • Rope<br>Inspect the entire length of all the rope looking for frayed edges, broken fibres, pulled stitches, cuts, burns and chemical damage. Also look for mildew, discoloration, hard shiny spots, any rope that has been marked with a felt pen, excessive hardness

  • Connecting device;<br>Ensure manucroche is free from damage or deformity and that it opens and closes freely.

  • Expiry Date

  • Rope is approved for use at time of inspection.

ADDITIONAL ROPE

  • Is ID label present & legible

  • SERIAL NUMBER

  • Manufacture Date

  • Rope<br>Inspect the entire length of all the rope looking for frayed edges, broken fibres, pulled stitches, cuts, burns and chemical damage. Also look for mildew, discoloration, hard shiny spots, any rope that has been marked with a felt pen, excessive hardness

  • Connecting device;<br>Ensure manucroche is free from damage or deformity and that it opens and closes freely.

  • Expiry Date

  • Rope is approved for use at time of inspection.

ROPE GRAB/SKR DEVICE

  • SERIAL NUMBER

  • Metal components free from damage or deformity.

  • Mechanism in working order

  • Rope Grab is approved for use at time of inspection.

LANYARD

  • Is ID label present & legible

  • SERIAL NUMBER

  • Manufacture Date

  • Rope/Webbing<br>Inspect the entire length of all the rope/webbing looking for frayed edges, broken fibres, pulled stitches, cuts, burns and chemical damage. Also look for mildew, discoloration, hard shiny spots, any rope/webbing that has been marked with a felt pen, excessive hardness.

  • Metal components free from damage, deformity or excessive wear

  • Karabiner mechanisms intact and in good working order.

  • Expiry Date

  • Lanyard is approved for use at time of inspection.

CHIMNEY STROP

  • Is ID label present & legible

  • SERIAL NUMBER

  • Manufacture Date

  • Rope<br>Inspect the entire length of all the rope looking for frayed edges, broken fibres, pulled stitches, cuts, burns and chemical damage. Also look for mildew, discoloration, hard shiny spots, any rope that has been marked with a felt pen, excessive hardness

  • Rope connecting device is free from damage, deformity or excessive wear .

  • Mechanism intact and in good working order.

  • Expiry Date

  • Chimney Strop is approved for use at time of inspection.

EYEBOLTS

  • Eyebolts present and in acceptable condition

KARABINERS

  • Karabiners free from damage, deformity or excessive wear

  • Mechanisms intact and in good working order.

RATCHET STRAPS

  • Webbing in acceptable condition, fibres, stitching and integrity

  • Ratchet device free from damage, deformity or excessive wear

Extension Ladder

  • Ladder ID number

  • Ladder description

  • Ladder stiles in an acceptable condition

  • Ladder Rungs in an acceptable condition

  • Ladder feet present and in good condition

  • Ladder hooks and fittings in good condition

  • Ladder is approved for use at time of inspection.

Extension Ladder

  • Ladder ID number

  • Ladder description

  • Ladder stiles in an acceptable condition

  • Ladder Rungs in an acceptable condition

  • Ladder feet present and in good condition

  • Ladder hooks and fittings in good condition

  • Ladder is approved for use at time of inspection.

ROOF LADDER

  • Ladder ID number

  • Ladder Description

  • Ladder stiles in an acceptable condition

  • Ladder Rungs in an acceptable condition

  • Ladder feet present and in good condition

  • Ridge hook and wheels in good condition

  • Ladder hooks and fittings in good condition

  • Ladder is approved for use at time of inspection.

STEPLADDER

  • Ladder ID number

  • Ladder description

  • Ladder stiles in an acceptable condition

  • Ladder steps in an acceptable condition

  • Ladder feet present and in good condition

  • Locking bars present and in working order

  • Hooks & fittings in good condition

  • Ladder is approved for use at time of inspection.

STEPLADDER

  • Ladder ID number

  • Ladder description

  • Ladder stiles in an acceptable condition

  • Ladder steps in an acceptable condition

  • Ladder feet present and in good condition

  • Locking bars present and in working order

  • Hooks & fittings in good condition

  • Ladder is approved for use at time of inspection.

INSPECTED BY :

  • undefined

  • Add signature

  • Next inspection due;

The templates available in our Public Library have been created by our customers and employees to help get you started using SafetyCulture's solutions. The templates are intended to be used as hypothetical examples only and should not be used as a substitute for professional advice. You should seek your own professional advice to determine if the use of a template is permissible in your workplace or jurisdiction. You should independently determine whether the template is suitable for your circumstances.