Title Page
-
SCISSOR LIFT OPERATOR EVALUATION
-
Jobsite Location:
-
Job #
-
Manufacturer (s)
-
Model (s)
-
Date of Verification:
-
Weather - Select all that apply
-
Superintendent (s):
-
Operator Name:
-
Years of Expierience
-
Reason for Evaluation
-
Prepared by
Evaluation
BEFORE STARTING ENGINE
-
Daily Pre-Use Inspection Completed?
-
Perform assessment walk of work area, check of area of operation and surrounding work area for potential hazards
-
Maximum Weight Observed
-
Control panel reviewed
-
Ground Control Functions Reviewed
-
Demonstrate Use of Safety Arm
FALL PROTECTION VERIFICATION
-
Demonstrate proper inspection of harness & retractable
-
Hand rails are fall protection on scissor lifts unless feet leave floor of working platform.
-
Anchorage points identified (structural w/scissor lift)
START UP & MANEUVERING
-
Operator turns body and head in direction of travel for best visibility.
-
Looking around for surface problems, avoid those problems
-
Adjust speed to conditions of work area
-
Raise and lower platform
-
Extend and retract slide out platform
-
Turn unit slowly and at a proper speed for conditions
-
Maneuver around obstacles – similar to those that will be encountered in the work area.
-
Emergency Lowering Control Located and Practiced
PARKING
-
Engine or electrical stop switch is in the off position
-
Assure machine is lowered all the way and is stopped on as level surface as possible
-
Maintains three points of contact when dismounting. Does not jump off of machine.
EVALUATION
-
Based on my evaluation, the operator has completed the evaluation and is qualified to operate the equipment
