Title Page
-
Document No.
-
Forklift - Hands-on Evaluation
-
Sejong Alabama LLC.
-
Conducted on
-
Prepared by
-
Location
-
Personnel
-
1. Shows familiarity with truck controls.
-
2. Gave proper signals when turning.
-
3. Slowed down at intersections.
-
4. Sounded horn at intersections.
-
5. Obeyed signs.
-
6. Kept a clear view of direction of travel.
-
7. Turned corners correctly - was aware of rear end swing.
-
8. Yielded to pedestrians.
-
9. Drove under control and within proper traffic aisles.
-
10. Approached load properly.
-
11. Lifted load properly.
-
12. Maneuvered safely.
-
13. Traveled with load at proper height.
-
14. Lowered load smoothly/slowly.
-
15. Stops smoothly/completely.
-
16. Load balanced properly.
-
17. Forks under load all the way.
-
18. Carried parts/stock in approved containers.
-
19. Checked dock plates/ramps.
-
20. Did place loads within marked area.
-
21. Did stack loads evenly and neatly.
-
22. Did drive backward when required.
-
23. Did place forks on the floor when parked, controls neutralized, brake on set, and power off.
-
24. Followed proper instructions for maintenance and inspections.
Certification:
-
Employee has demonstrated safety and control in completing the above listed objectives. Employee is now authorized to operate similar equipment for a period of time no greater than 3 years.
-
Employee Signature
-
Evaluator Signature