SM Roof Framing Inspection

• Project Location
  Address

• Conducted on

  Date

• Prepared by

• Building Control Officer

Structural Steel

• Is all structural steel installed in the correct location?

  Yes

  No

  N/A

• Is all structural steel installed the correct finish for the location/exposure?

  Yes

  No

  N/A

• Is all structural steel the correct size/profile?

  Yes

  No

  N/A

• Are all structural steel connections bolted correctly and tight?

  Yes

  No

  N/A

Tie Down and Bracing

• Tie Down - Are tie down rods installed as per structural design?

  Yes

  No

  N/A

• Tie Down - Are tie down rods all tightened up with no play?

  Yes

  No

  N/A

• Bracing - Is all sheet bracing locations installed as per structural design?

  Yes

  No

  N/A

• Bracing - Is sheet bracing nailed off with correct fixings and centres?

  Yes

  No

  N/A

Timber Framing

• Has the floor plan layout been checked against the working drawings?

  Yes

  No

  N/A

• Timber framing - Is all timber used the correct treatment and grading?

  Yes

  No

  N/A

• Wall frames - Are wall frames set out square?

  Yes

  No

  N/A

• Wall frames - Are bottom plates straight?

  Yes

  No

  N/A

• Wall frames - Are top plates straight?

  Yes

  No

  N/A

• Wall frames - Are wall frames installed plumb?

  Yes

  No

  N/A

• Wall frames - Have studs been checked for straight?

  Yes

  No

  N/A

• Wall frames - Are top plate connectors installed?

  Yes

  No

  N/A

• Wall frames - Bottom plate fixings installed as per structural engineering plans?

  Yes

  No

  N/A

• Wall frames - Are lintel sizes/fixings/stud supports and straps as as per structural engineering plans?

  Yes

  No

  N/A

• Wall frames - Are all point load stud locations/fixings correct and line up with the load it is supporting?

  Yes

  No

  N/A

• Wall frames - Are all fixings/connections correct in locations of timber beams to posts?

  Yes

  No

  N/A

• Wall frames - DPC installed under bottom plate?

  Yes

  No

  N/A

• Mid floor - Are wind beams installed as per working drawings, correct size and fixings?

  Yes

  No

  N/A

• Mid floor - Do the joist sizes and spans match the structural engineering drawings?

  Yes

  No

  N/A

• Mid floor - Are all bearers and structural joists the correct size, grade and span?

  Yes

  No

  N/A

• Mid floor - Is all mid floor hardware (joist hangers etc) installed as per working drawings?

  Yes

  No

  N/A

• Mid floor - Are the balcony joists installed with correct fall and step downs to comply with the NCC?

  Yes

  No

  N/A

• Mid floor - Has the flooring sheets been glued and fixed to the joists in the correct manner to prevent squeaks/creaks?

  Yes

  No

  N/A

• Roof framing - Is the truss spacing correct as per truss plan?

  Yes

  No

  N/A

• Roof framing - Is all truss hardware installed as per truss plan?

  Yes

  No

  N/A

• Roof framing - Are rafters the correct size and spacing?

  Yes

  No

  N/A

• Roof framing - Is the roof plane bracing installed to the roof where required, is it installed correctly?

  Yes

  No

  N/A

Sign Off

• Is Roof work complied with Building Regulations

  Yes

  No

  N/A

• Site Manager

  Sign

• Building Control Officer

  Sign