Spitwater Client Handover Form

• Thank you for choosing a quality Spitwater product. Spitwater offers product reliability as well as service and parts support. Your pressure cleaner comes complete with a 12-month manufacture warranty which covers the product against faulty materials and workmanship. Your Spitwater during this warranty period needs to be serviced by a Spitwater branch or an authorised Spitwater dealer. Please head to www.spitwater.com.au to find your closest Spitwater service agent. Please refer to the Manual for operating procedures and recommended servicing intervals.

• Invoice Number

• Model

• Serial number

• Location
  Address

• Completed on.

  Date

• Customer/Company Name.

• Address.

• Contact Name.

• Contact Number.

• Email Address

• All parts / fittings have been supplied as per Invoice Delivery Docket

• Commision Machine on site and identify any site issues (Power/ Water Supply/ Environment)

• Notes - Site issues if applicable

• Training has been conducted on site with customer

• Delivery docket signed by customer

• Invoice presented to customer

• Operators manual has been handed over and referenced to.

• Warranty Registration has been completed https://spitwater.com.au/ivegota/

PERSONAL SAFETY

• Any Injury caused by high pressure water please seek immediate medical attention and advise medical services this it is a high pressure water injury.

• 

WORK ZONE AND EQUIPMENT SAFETY

SAFTEY PRECAUTIONS

• 

• All Operators must read the owners manual prior to use

• Customer has been advised of safety and risk assessment when operating equipment

• Before you start the machine always check oil in pump and engine where fitted

  

• Connect high pressure hose, gun and lance

  

• Connect water to machine and turn water on

  

• Do not adjust the pressure regulator- this has been set at factory setting to match your machine output and provide optimal performance

• keep nozzles out of the dirt and grass, store lance and nozzles utilising the accessory lance holder. This will prevent debris in nozzle causing a blockage and machine not performing as per manufacture specification.

MULTIREG DEVICE

DOUBLE LANCE

HOT WATER

• Always run cold water through lance before turning the machine off. This stops build of scale in the heater coil and will prolong it's service life.

• Your new SPITWATER Pressure Cleaner is built to be Tough + Ready, and comes covered by our Australia wide warranty against manufacture defaults. Your new SPITWATER Pressure Cleaner will still require regular maintenance to keep it Tough + Ready, and just like the most reliable vehicle in the world will wear tyres and brakes relevant to use and conditions, your pressure cleaner also has consumable items that will need replacing as part of regular maintenance and expected running costs. Items that are considered consumable include, but not limited to, High Pressure Hose, Pressure Nozzles, Guns, Unloader Valves. Your SPITWATER Solution Specialist will be happy to provide more details around expected maintenance costs and life expectancy of consumable items. Please refer to our full Warranty Terms and Conditions for more details on what is, and isn’t covered under our warranties. These warranties do not exclude Australian Consumer Law.

• Servicing is required after the first 50 hours - then every 200 hours

  

• Does the customer want to be on PM Schedule?

  Yes

  No

  N/A

• 

• Additional Notes:

• Photos of the unit and location

  Media

• Spitwater representative name

  Sign

• Customer Name

  Sign