Inspection Details
-
The Stacey Electrical Services Quality Assurance Inspection Checklist ensures all electrical installations are completed to a high standard, focusing on first and second fix stages. It covers key elements such as cable management, back box installation, faceplate alignment, and functional testing to verify compliance, safety, and performance. Photos must be included in the inspection.
-
Site conducted
-
Plot No.
-
Conducted on
-
Prepared by
-
Location
First Fix
-
Cables neatly clipped in correct wiring zones?
-
Cables secured correctly through noggins?
-
Cables protected where required
-
All back boxes fitted and level.
-
Cable routes clear of obstructions.
-
Smoke/heat detector cables in correct locations.
-
Main bonding cables installed.
-
Consumer unit backboard fitted securely.
-
Correct cable identification labels fitted.
-
All cables left safe and ready for plastering.
-
Earth sleeving installed where required.
- Yes
- No
- N/A
-
All cables kept clear of gas/water pipes.
-
Thermostat cabling installed in correct locations.
Second Fix & Final Fix Inspection Checklist
-
Sockets/switches etc screwed back correctly, right way up & level.
-
Consumer unit installed between 1350mm and 1450mm.
-
Correct circuit breakers & blanks fitted.
-
RCBO fitted for solar.
-
Electrical outlets 100mm minimum away from hob/splash back.
-
Electrical outlets 300mm minimum away from sink bowl.
-
Smoke detectors 300mm away from wall or light fittings.
-
All electrical outlets fitted before energising.
-
Request to energise form completed and signed and lock off kit fitted on unfinished installations.
-
Vent grills 4 no. mechanical fixings and all fitted.
-
All fans connected to loft ducting and mechanically fixed.
-
Lamps to pendants installed.
-
Heating system and controls fitted and instructions given to site team.
-
All two-way lighting functional check and working correctly to circuit.
-
All fans set to correct room type.
-
Socket pips installed or given to site team if painter to masking tape sockets.
-
Socket pips installed or given to site team if painter to masking tape sockets.
-
Grid switch correctly operating correct appliances.
-
Functional testing of circuit designation.
-
End to end continuity test completed when terminating consumer unit.
-
Outside lights installed, and if not safely capped off.
-
Functional check of smoke detector interlink.
-
Smoke detector in loft fitted.
-
Customer options checked and cross-checked from options list to options drawings.
-
EVCP installed and instructions/RF cards given to site team.
-
All low voltage outlets installed.
-
Final check of circuits before energising, including appliance outlets.
-
Plot all inspection for surplus materials and left clean and tidy for following trades.
Stacey Electrical Services Quality Assurance Inspection Sign-Off
-
Prepared By (Name & Signature):
-
Date & Time:
-
Client/Principal Contractor Approval (Name & Signature):
-
Date & Time:
