Stallion Centrifuge Commision Report 1.1 - duplicate

• Operator:

• Operations Area

  Mid-Continent

  West Texas

• Rig Name:

• Rig Activity:

• Well #:

• Commissioning Date:

• Auditor's Name:

Computer/Printer/Retort Supplies

• Stallion computer with all Operations and HSE Reports?

  Yes

  No

  N/A

• Retort Kit complete with Accessories?

  Yes

  No

  N/A

Assets / Daily Reports / JSA's / Contingencies

• JSA Form available?

  Yes

  No

  N/A

• Risk Assessment/ JSA Completed?

  Yes

  No

  N/A

• All Information on Daily Report Regarding Co Rep Names & Contact Numbers?

  Yes

  No

  N/A

Clear Walkways

• All Hazards Identified and Mitigated?

  Yes

  No

  N/A

• All Transfer Hoses Ran in a Safe Manner? Please provide photos

  Yes

  No

  N/A

• All Electrical Wires Ran in a Safe Manner and off of the ground? Please supply photos

  Yes

  No

  N/A

Electrical Hazards Identified

• All Equipment Properly Grounded with Grounding Wire Secured? Please provide photos

  Yes

  No

  N/A

• Check BICC Connections for Exposed Wire and / or Water-tight Seal? (Peckerheads, top & bottom of all electrical panels)

  Yes

  No

  N/A

Material Inspection

• Are Decking Rubbers in Good Operating Condition on Shaker 1? Please provide photos.

  Yes

  No

  N/A

• Are Decking Rubbers in Good Operating Condition on Shaker 2? Please provide photos.

  Yes

  No

  N/A

• Are Decking Rubbers in Good Operating Condition on Shaker 3? Please provide photos.

  Yes

  No

  N/A

• Are screens properly installed on shakers? Please provide photos

  Yes

  No

  N/A

Electrical Inspection

• Are all BICC connectors in good condition?

  Yes

  No

  N/A

• Are all power cords in good condition?

  Yes

  No

  N/A

• Are all starter boxes closed and secure?

  Yes

  No

  N/A

• Proper Rotation of Drying Shaker Motors?

  Yes

  No

  N/A

• Shakers conveying cuttings the right direction?

  Yes

  No

  N/A

Centrifuge Stand #1

• Are all handrails up and in good condition?

  Yes

  No

  N/A

• Centrifuge Stand Has All Support Pins in Place W/ Safety Pin Keepers? Please provide photo

  Yes

  No

  N/A

• Effluent Line Under Carriage of Centrifuge Secured? Please provide photo

  Yes

  No

  N/A

• Is Centrifuge slide at the steepest possible angle? Please provide photo

  Yes

  No

  N/A

Centrifuge Stand #2

• Are all handrails up and in good condition?

  Yes

  No

  N/A

• Centrifuge Stand Has All Support Pins in Place W/ Safety Pin Keepers? Please provide photo

  Yes

  No

  N/A

• Effluent Line Under Carriage of Centrifuge Secured? Please provide photo

  Yes

  No

  N/A

• Is Centrifuge slide at the steepest possible angle? Please provide photo

  Yes

  No

  N/A

Cleaning

• Is centrifuge 1 exterior clean?

  Yes

  No

  N/A

• Is centrifuge 1 interior Clean?

  Yes

  No

  N/A

Exterior Inspection

• Is Coffin Lid in Good Operating Condition and free of Cracks? Please provide photos with one showing asset tag.

  Yes

  No

  N/A

• Are all Coffin Lid Bolts in Good Operating Condition? Please provide photos.

  Yes

  No

  N/A

• Open coffin lid on Centrifuge 1 to see rotating assembly. Are Centrifuge Plows / Wear Inserts in Good Operating Condition? (no damage to rotating assembly) Provide photos.

  Yes

  No

  N/A

• Do Centrifuge 1 Plows have all fasteners secured properly in Good Operating Condition? Please provide photo

  Yes

  No

  N/A

• Is the Solids Wear Liner on Centrifuge Good Operating Condition (no damage to the rotating assembly)? Provide photo

  Yes

  No

  N/A

• Rotation correct on Centrifuge 1

  Yes

  No

  N/A

Feed Pump

• Feed Pump wired into panel?

  Yes

  No

  N/A

• All hoses connected to feed pump correctly?

  Yes

  No

  N/A

• Rotation Checked on feed pump?

  Yes

  No

  N/A

Cleaning

• Is Centrifuge 2 exterior Clean?

  Yes

  No

  N/A

• Is Centrifuge 2 interior Clean?

  Yes

  No

  N/A

Exterior Inspection

• Is Coffin on Centrifuge 2 in Good Operating Condition and free of Cracks? Please provide photos with asset # in one photo.

  Yes

  No

  N/A

• Are all Coffin Lid Bolts on Centrifuge 2 in Good Operating Condition? Please provide photos.

  Yes

  No

  N/A

• Open coffin lid on Centrifuge 2 to see rotating assembly. Are Centrifuge Plows / Wear Inserts in Good Operating Condition? (no damage to rotating assembly) Provide photos.

  Yes

  No

  N/A

• Does Centrifuge 2's End Wear Plate in Good Operating Condition? ( no damage to rotating assembly) Provide 2 photos from different angles.

  Yes

  No

  N/A

• Is the Solids Wear Liner on Centrifuge 2 in Good Operating Condition (no damage to rotating assembly) Provide 2 photos from different angles

  Yes

  No

  N/A

Feed Pump

• Feed Pump plugged into panel

  Yes

  No

  N/A

• All hoses connected to feed pump correctly?

  Yes

  No

  N/A

• Rotation checked on feed pump?

  Yes

  No

  N/A

Overall Rig Up

• Take pictures of total installation at different angles

  Yes

  No

  N/A

Liability Mitigation

• Take Pictures of all Third Party Equipm. - Excavator, Generator, etc...

  Yes

  No

  N/A