Title Page
-
Site conducted
-
ITP No.
-
Principal Contractor / Builder:
-
Project Name/Address:
-
Conducted on
-
Applicators Name:
-
Location / Area where product is installed:
-
STRONG SEAL WATERPROOFING
david@strongseal.com.au
Product Installed
-
Select Membrane Type
- Liquid or Spray Applied Membrane
- Sheet Membrane
-
Product Name:
- Grace Aquagard M40R
- Grace Aquagard M
- Grace Aquagard M Non-Slip Topcoat
- Grace Newflex R100
- Grace Ultraure A-80 Membrane
- Grace Newflex WAM Fibre Grey
- Grace Tuffcote Duratop
- Grace Fastflex
- Tremco Vulkem Non-Exposed Membrane (N.E.M.)
- Pasco Aquaproof 110
- Pasco Aquaproof 115
- Pasco Aquaproof SLM
- Tremco Eco NEM
- TREMproof® 60
- TREMproof® 90
- Tremco TREMproof 120
- Vulkem® 350-R NF
- Tremco Tremproof 350 SL
- Tremco Tremproof 351
- Vulkem® 360NF
- Vulkem® 951NF
- Tremco TREMproof® 250GC
- Ardex WPM 157 membrane
- Ardex WPM 908
- Ardex WPM 155
- Ardex WPM 179
- Ardex WPM 300
- Grace Epocote F100W HD
- Grace Epocote F100 Grey
- Grace Epocote F100 Clear
- Grace Ultraure A80 Top Coat
- Gripset E60
- Other
-
Product Name and Description:
5. Fillets / Caulking
-
Fillets/Caullking has been installed as per product data sheet
6. Base layer of Membrane
-
The base layer of the membrane has been installed as per the product data sheet
-
All penetrations, upstands and waste outlets have been treated as per product data sheet
7. UV stable top coat Installed over base membrane
-
The UV stable top coat has been installed over the base membrane as per product data sheet
- Yes
- Still to be installed
- Not required - membrane not exposed
8. Pictures of Area that was installed / inspected:
-
Pictures of area:
-
Pictures of Floor Wastes:
-
Pictures of Penetrations:
-
Pictures of upstands:
-
Any Notes / Comments / Issues:
Inspected and approved by Strongseal Waterproofing
-
undefined
Inspected and Approved by Project Representative
-
undefined
-
Product Name:
1. Product has been checked and matches that quoted:
-
Product is suitable for location
2. Inspection of Substrate
-
Substrate Inspected, accepted and ready for application of the membrane as per the product data sheet.
-
Photo of the area prior to application starting
-
Any Notes / Comments / Issues:
3. Clean and Prep area
-
Area has been cleaned as suitable for the membrane application and the product data sheet.
4. Priming
-
Area has been primed as per the product data sheet
5. Fillets
-
Fillets have been installed as per product data sheet
6. Application of membrane
-
Membrane has been applied as per product data sheet
-
All junctions, penetrations and upstands have been detailed as per product data sheet.
8. Pictures of Area that was installed / inspected:
-
Pictures of area:
-
Pictures of Floor Wastes:
-
Pictures of Penetrations in membrane:
-
Pictures of Upstands:
-
Any Notes / Comments / Issues:
-
To be used for multiple locations on site:
Inspected and approved by Strongseal Waterproofing
-
undefined
Inspected and Approved by Project Representitive
-
undefined
-
The above has taken into account Waterproofing as per:
- AS 4858 - AS3740 - AS 4654.1 - AS 4654.2 -
Strongseal Wateproofing david@strongseal.com.au