Information
-
Conducted on
-
Prepared by
-
Model Barcode
Function - General
-
SFG1: Stretch wrap in V notch on bottom pad.<br><br><br><br>
-
SFG2: 2 Bands on carton, correct corner post, center post.<br><br>
-
SFG3: No sharp edges on case<br>
-
SFG4: Drawers are not too tight, have good opening action<br><br>
Function - Case Assembly
-
SFC1: Unit is square, not racked<br><br>
-
SFC2: Lock assembly turns easily and operates correctly<br><br>
-
SFC3: Lock bar engages/disengages all drawers<br><br>
-
SFC4: Lock core is removable with core key<br><br><br>
-
SFC5: Leveling glide turns<br><br><br><br><br>
Function - Drawer Assembly
-
SFD1: Door/Drawer is free of damage<br><br><br><br>
-
SFD2: No sharp edges<br><br><br><br><br>
-
SFD3: Door/Drawer operates smoothly<br><br><br><br>
-
SFD4: Lock rods move freely<br><br><br><br>
-
SFD5: Door/Drawer opens and closes smoothly, no binding. <br><br><br><br>
Function - Other
-
SFO1: Hardware is present and correct<br><br>
-
SFO2: Installation instructions are present and correct<br><br><br><br>
-
SFO3: Caution label present <br><br><br><br>
-
SFO4: Shelves engaged in clips all 4 corners<br><br><br><br>
-
SFO5: Shelf protector pads present and taped <br><br><br><br>
Appearance - General
-
SAG1: No fingerprints, grease, or oil is on case exterior<br><br><br><br>
-
SAG2: Case gaps are equal and uniform<br><br><br><br>
Appearance - Case Assembly
-
SAC1: There is no light or heavy paint<br><br><br>
-
SAC2: There are no paint runs<br><br>
-
SAC3: No dents, creases, or scratches are visible<br><br>
-
SAC4: All components of the unit align properly<br><br><br><br>
-
SAC5: Weld burrs or weld flash<br><br><br><br><br><br>
Appearance - Drawer Assembly
-
SAD1: There is no light or heavy paint<br><br>
-
SAD2: There are no paint runs<br><br>
-
SAD3: No dents or creases are visible<br><br>
-
SAD4: No scratches or back bends visible<br><br><br><br>
-
SAD5: No excessive glue on the door stiffener<br><br><br><br>
-
SAD6: All bends have good paint adhesion<br><br><br><br><br><br>
Appearance - Welds
-
SAW1: No pitting, flashing, pin-holes, or flying corners are present<br><br><br><br>
-
SAW2: Welds do not protrude from surface<br><br>
-
SAW3: Other<br><br><br>
Sign Off
-
Signature