Title Page
-
Site conducted
-
Conducted on
-
Prepared by
-
DA Number
-
Address
-
Building Company undertaking works?
-
Inspect internal pool barrier. Photograph the areas.
-
Inspect the gate check latch and location height. Is this compliant?
-
Photograph of gate(s) & latch(es)
-
Photograph to include tape measure indicating latch height
-
Barrier - Min -1200mm height, 100mm max openings, 900mm NCZ
-
Photograph to show tape measure indicating pool barrier height
-
Barrier - Free of climbable surfaces within the NCZ
-
Boundary - Min 1800mm height. Are rails compliant if any? 900 NCZ
-
Photograph of Boundary Barrier
-
Photograph of boundary barrier to show tape measure indicating height.
-
Intersecting Barriers - Internal barrier into boundary barrier ≤ 50mm wide or 900mm long
-
Barrier - dwelling (openings, sills, ledges)
-
Photo of barrier in relation to dwelling openings (if relevant)
-
Is the pool/spa within a building enclosure?
-
Are doors to the indoor pool compliant with Child resistant door set requirements?
-
In ground skimmer - Skimmer box hole 280mm<width> 150mm ≥ 200mm or ≤ 150mm; ≥ 100mm separation to pool wall; 2nd outlet point ≥600mm
-
Above ground - Skimmer basket hole ≥ 200mm deep; pool wall extending ≥75mm above skimmer; 2nd outlet point ≥600mm
-
Without skimmer box - Minimum 2 outlet points ≥600mm apart / compliant cover
-
CPR signage?
-
Photograph of CPR signage
-
Is the pool and spa barrier compliant with approved plans?
-
is an amendment or variation to the DA required?
-
Signature
