Strength

  • Cube Strength -

LENGTH / CAMBER CHECK

  • Actual Length (L)

  • Label Length

  • Within +/- 25mm

  • Camber measurement

  • Camber allowance L/300

  • Is actual Camber

WIRE POSITION CHECK

  • CS120 beam wire position.png
  • Wires within +/- 10mm of reference positions?

  • Are wires flush with end of beam?

  • If the answer to any of the above is “No” report to foreman as “NON-CONFORMANCE”

  • Has the issue been reported to the Foreman for action to be taken?

The templates available in our Public Library have been created by our customers and employees to help get you started using SafetyCulture's solutions. The templates are intended to be used as hypothetical examples only and should not be used as a substitute for professional advice. You should seek your own professional advice to determine if the use of a template is permissible in your workplace or jurisdiction. Any ratings or scores displayed in our Public Library have not been verified by SafetyCulture for accuracy. Users of our platform may provide a rating or score that is incorrect or misleading. You should independently determine whether the template is suitable for your circumstances. You can use our Public Library to search based on criteria such as industry and subject matter. Search results are based on their relevance to your search and other criteria. We may feature checklists based on subject matters we think may be of interest to our customers.