Title Page
-
Conducted on
-
Inspection By
-
Todays Inspection Number
-
Bed Number
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
-
Beam Type
-
Casting Date
-
Cast No:
Strength
-
Cube Strength -
LENGTH / CAMBER CHECK
-
Actual Length (L)
-
Label Length
-
Within +/- 25mm
-
Camber measurement
-
Camber allowance L/300
-
Is actual Camber <L/300
WIRE POSITION CHECK
-
Wires within +/- 10mm of reference positions?
-
Are wires flush with end of beam?
-
If the answer to any of the above is “No” report to foreman as “NON-CONFORMANCE”
-
Has the issue been reported to the Foreman for action to be taken?