Title Page
-
Site conducted
-
Reference - this is autofilled
-
Conducted on
-
Inspected by
-
Location
-
Site Supervisors Name
- Tank/ Bund Inspection
-
Tank Name/ ID
Tank Questions
-
Material - What is it made of
-
Tank sides and panels - Can you see any corrosion, rust, cracks, or warping
-
Welded or bolted joints - Can you see any corrosion, rust or leaks
-
Can you see any substantial damage, cracking or crazing to the tank
-
Can you see any damp areas that may indicate an internal crack or hole
-
Is there any evidance on the surrounding ground of leakage
-
Condition of the inlet valve's
-
Condition of the outlet valve's
-
Condition of the sight glass
-
Are security locks fitted to inlet and outlet valves during non operational hours
-
Are all vents and fill points protected to prevent water and debris from entering
-
Is the tank labelling and any operating instructions still present and legible
Bund/ Secondary Containment Questions
-
Does the bund need emptying of rainwater, leaves or any other waste
-
Condition of secondary containment floor - Does it look sealed with no cracks
-
Walls of secondary containment - Any visible cracks, any leaks seen on the outside are expansion joints in good condition
-
Is secondary containment adequate to contain 110% of the tanks capacity
Sign off
-
Inspected by