Title Page
-
Inspection Date
-
KM reading
-
Driver's Name
Appliance
Cabin and Mechanical
Mechanical Checks
-
Check Engine Oil is filled to correct level and in good condition
-
Check Washer Fluid is full
-
Check Radiator Coolant is full
-
Visual inspection of tyres for damage and correct inflation
Lights
-
Have a member outside the appliance visually confirm each light is in working order.
Communicate which light is being tested to ensure all lights are tested for operation. -
Headlights Low Beam
-
Headlight High Beam
-
Parking lights
-
Fog lights
-
Alley lights
-
Indicators
-
Emergency response lights
-
Clearance Lights
-
Brake Lights
-
Reversing Alarm
-
Reversing Lights
-
Emergency response siren multiple modes
-
Standard Horn
-
Air Horn
-
Windscreen Wipers
-
Cabin Lights
-
Confirm locker lights are working while completing equipment inspections
Cabin Equipment
Front Seats
-
Fire Reporting Folder is present and contains the below
- Primary Fire Report Information Gathering Prompt
- Blank page for notes
- Whiteboard markers
- Guide for Agencies Dealing with Fire and Burning Off
- Firebombing Safety
- Phonetic Alphabet Cheat sheet
- During Fire Danger Period - Can I or can't I
- Outside of Fire Danger Period - Council bylaws for burning off
Only the document applicable for the time of year should be contained in the folder.
- Incident Management Log
- Incident Management Organiser
- False Alarm and Entry Advice Book
- Misc Pens, Permanent Markers -
Is any equipment missing or damaged?
Radio
-
Radios
Change over all portable batteries with fully charged batteries from charger in station including all spare batteries
Turn portable radios on and ensure they are indicating fully charged and set to default fire ground channel of 280
Ensure mobile radio is set to correct dispatch channel of 508 and volume is set to audible level -
Are all radios in working order?
-
Center Console
Ensure all equipment is present, stowed correctly and free from damage.
- 2 x Bottles of water
- 3 x Portable Radios
- 3 x Spare Portable Radio Batteries
- Melways
- Spatial Vision Central
- Tree Hazard Pictorial Guide
- Hazards at aircraft accident sites - Guidance for police and emergency personnel
- Strike Team Registration Booklet
- T Cards
- OHS Incident Report Cards (Salmon Cards) -
Is any equipment missing or damaged?
-
Passenger's Seat Overhead
Ensure all equipment is present, stowed correctly and free from damage.
- HB76 Initial Emergency Response Guide
- Hazmat Action Guides
- Crew Leader Arm Band
- Incident Controller Vest (On Passenger's Seat) -
Is any equipment missing or damaged?
-
Driver's Seat Overhead
Ensure all equipment is present, stowed correctly and free from damage.
- Vehicle log book -
Is any equipment missing or damaged?s
Back Seats
-
Ensure all equipment is present, stowed correctly and free from damage.
5 x Blankets
5 x Ration Packs
2 x Boxes of Nitrile Gloves
1 x Box of P2 masks -
Is any equipment missing or damaged?
-
P2/Surgical Masks Box is Full
-
Nitrile Gloves Full
Near side
NS1
-
Ensure all equipment is present, stowed correctly and free from damage.
- Halligan Tool
- Sledge Hammer
- Axe
- Bolt cutters
- Jimmy Bar -
Is any equipment missing or damaged?
NS2
-
Ensure all equipment is present, stowed correctly and free from damage.
- Jumper leads
- Air Hose
- Quick fill pump
- Bucket
- Funnel
- Unleaded Fuel
- Bottle Jack
- Wheel nut tools -
Is any equipment missing or damaged?
-
Is the locker lighting working correctly?
-
Test Operation of quick fill pump
DO NOT RUN PUMP DRY!!!
Utilising 75mm STORZ to 65mm STORZ adapter connect inlet of pump to hydrant to supply water to ensure pump does not overheat.
Start pump and supply water. -
Ensure Quick fill pump is full of unleaded fuel and test operation
-
Ensure jerry can is full of fuel
NS3
-
Ensure all equipment is present, stowed correctly and free from damage.
- Hydrant standpipe
- Hydrant key -
Is any equipment missing or damaged?
Foam Carboys
-
Ensure all equipment is present, stowed correctly and free from damage.
- 2 x A Class Foam Carboys
- 2 x B Class Foam Carboys -
Ensure all foam carboys are full and replace is necessary
NS4
-
Ensure all equipment is present, stowed correctly and free from damage.
- 2 x Canvas 64mm Hose
- 1 x Duraline 64mm Fill Length
- 2 x Canvas 25mm Hose -
Is any equipment missing or damaged?
-
Is the locker lighting working correctly?
NS5
-
Ensure all equipment is present, stowed correctly and free from damage.
- 2 x MSA BA sets
- 2 x Spare BA Cylinders
- 2 x Splash Suits
- Guide Line
- Wildfire Thermal Imaging Camera
- BA Control Board -
Is any equipment missing or damaged?
-
Is the locker lighting working correctly?
-
Have a qualified BA Operator complete the weekly BA Check
1. Visual Inspection
2. Open cylinder valve, listen for whistle operation during pressurisation (short sharp whistle)
3. Allow 2 minutes for pressure equalisation (Minimum 250 bar for stowage on appliance)
4. Close cylinder valve. The pressure gauge reading should not drop more than 10 bar in one minute
5. Check Distress Signal Unit (DSU) for correct operation (Motion and Manual Alarm
6. Check Battery Status. Replace battery if indicating low.
7. Check the Electronic Self-Test and control module operation.
8. Check voice projection speaker
9. Check the heads up display (HUD) -
Weekly BA checks
-
BA Operator who completed checks
-
BA set number/s which failed
-
BA Operator who completed checks
-
Change over Thermal Imaging Camera Battery with Spare
-
Test operation of Thermal Imaging Camera
NS6
-
Ensure all equipment is present, stowed correctly and free from damage.
- 2 x 4.5kg ABE Fire Extinguishers
- 1 x Wheel Chock
- 1 x Foam dip stick
- 1 x Foam inline inductor
- 1 x Foam extension tube -
Is any equipment missing or damaged?
-
Is the locker lighting working correctly?
NS7
-
Ensure all equipment is present, stowed correctly and free from damage.
Top Shelf
- Decontamination Kit (Asbestos Kit)
Middle Shelves
- 1 x Pair gumboots
- 4 x Eflares
- Incident Tape
- Airbag Tape
- Duct Tape
- Tool Box
- 4 x Teddies
- Reflective Triangles
- Insect repellent
- P2 masks
- Nitrile Gloves
- Plugitup
Bottom Shelf
- Defib
- Air Viva
- First Aid Kit -
Is any equipment missing or damaged?
-
Is the locker lighting working correctly?
-
Have person qualified in CPR complete Weekly Test of Defibrillator
1. Press the "i" button and ensure voice announcement of "ready for use" is heard -
Defibrillator
-
CPR or Advanced Resuscitation Operator who completed checks
-
CPR or Advanced Resuscitation Operator who completed checks
-
Have qualified Advanced Resuscitation operator complete Weekly Test
1. Check contents and condition of equipment.
2. Check Function of Patient Valve & Intake. -
Air-Viva
-
Advanced Resuscitation Operator who completed checks
-
Advanced Resuscitation Operator who completed checks
NS8
-
Ensure all equipment is present, stowed correctly and free from damage.
Top Shelf
- Chain saw helmet
- Chainsaw Chaps
- Foam Handling Kit
Hoses
- 5 x 38mm Canvas Hose
Fittings
- 2 x Black out branches
- 2 x 38mm hose bandages
- 2 x 65mm hose bandages
- Pump strainer tool
- 2 x Onekey
- 1 x Class A Medium expansion foam branch
- 1 x Class A Low expansion foam branch
- 1 x Class B foam branch
- 75mm to 65mm STORZ adapter
- 3TPI male to 65mm STORZ adapter
- 3 TPI female to 65mm STORZ adapter
- 1 x 5 TPI Female to 3 TPI Male
- 2 x Structural Protek branches
- Live/Dead Hose rewind handle
- 2 x STORZ keys -
Is any equipment missing or damaged?
-
Is the locker lighting working correctly?
Rear Panel
Pump Panel
Lights
-
Have a member outside the appliance visually confirm each light is in working order.
Communicate which light is being tested to ensure all lights are tested for operation. -
Panel Light
-
Rear Work Light
-
Ensure all equipment is present, stowed correctly and free from damage.
- 1 x Extension ladders
Ensure extension ladder is correctly stowed and locked in position
- 1 x STORZ to 38mm External Lug
- 4 x 38mm Canvas hose on dead reel -
Start pump and test all controls
-
Show water from live reel
Off side
OS2
-
Ensure all equipment is present, stowed correctly and free from damage.
- 1 x Yabbie net
- 1 x 20m Rope
- 1 x Float
- 2 x Hose Ramps
- 1 x Wheel Chock
- 2 x Tennis Balls
- 1 x Suction Strainer
- 1 x 75mm STORZ to 3 TPI (For bushfire tanks) -
Is any equipment missing or damaged?
-
Is the locker lighting working correctly?
OS1
-
Ensure all equipment is present, stowed correctly and free from damage.
- 2 x Rake Hoes
- 4 x Hard suction hoses 1 complete with foot valve and strainer -
Is any equipment missing or damaged?
Rear Deck
-
Top of tank
Ensure all equipment is present, stowed correctly and free from damage.
5 x 2m 38mm Duraline
- 2 x Straight jet branches -
Is any equipment missing or damaged?
-
Blanket Locker
Ensure all equipment is present, stowed correctly and free from damage.
2 x Blankets -
Is any equipment missing or damaged?
-
Start pump and test all controls
-
Test intercom between deck and cabin and ensure correct operation
Lights
-
Have a member outside the appliance visually confirm each light is in working order.
Communicate which light is being tested to ensure all lights are tested for operation. -
Near side deck spot light
-
Off side deck spot light
-
Panel lights
-
Crew lights
-
Visually check the slight tube on the Class A foam tank and ensure tank is full
-
Visually check the sight tube on the Class B foam tank and ensure tank is full
Coffin Locker
-
Ensure all equipment is present, stowed correctly and free from damage.
- Chainsaw
- 2 x Knapsacks
- Spare bar and chain
- Bar Oil
- 2 stroke jerry can
- drip torch jerry can
- Milwaukee light -
Is any equipment missing or damaged?
-
Ensure chainsaw is full of 2 stroke fuel and test operation
-
Ensure Milwaukee tool batteries are Fully Charged
-
Ensure jerry cans are full of fuels
Offside
-
Ensure all equipment is present, stowed correctly and free from damage.
- 10 x traffic cones
- 2 x bucket of absorbent material
- deck monitor
- foam nozzle for deck monitor
- 2 x stop slow battens
- 1 x Shovel -
Is any equipment missing or damaged?
-
Ensure Sockerall buckets are full
Near side
-
Ensure all equipment is present, stowed correctly and free from damage.
- Broom
- Drip torch
- Esky -
Is any equipment missing or damaged?
-
Drip torch is filled and ready for use
-
Esky is full of bottled water
Finalise
-
Before entering the cabin
Start pump and set throttle is set to idle -
Engage crew protection sprays and ensure correct operation
-
Engage tire wheel sprays and ensure correct operation
Completion
-
Tablet is Fully Charged
-
Vehicle has completed 30km driving throughout the week
-
Check Vehicle fuel is full
-
Ensure dashcam is in working condition
-
Vehicle Log Book Completed
-
Inspector's Name and Signature
